EMOS P56501 Bedienungsanleitung
EMOS
Rauchmelder
P56501
Lies die bedienungsanleitung für EMOS P56501 (70 Seiten) kostenlos online; sie gehört zur Kategorie Rauchmelder. Dieses Handbuch wurde von 14 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 7.5 Bewertungen. Hast du eine Frage zu EMOS P56501 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/70
2104101000_31-P56501_00_01_WEB 105 × 148 mm
www.emos.eu
P56501 | GS536-H01, GS536G
GB Smoke Detector
CZ Detektor kouře
SK Detektor dymu
PL Detektor dymu
HU Füstérzékelő
SI Detektor dima
RS|HR|BA|ME Detektor dima
DE Rauchmelder
UA Детектор диму
RO|MD Detector de fum
LT Dūmų detektorius
LV
Dūmu detektors
EE Suitsuandur
BG Датчик за дим
FR Détecteur de fumée
IT Rivelatore di fumo
ES Detector de humo
NL Rookmelder
2
GB | Smoke Detector
This manual contains important safety information regarding the installation and operation of the
detector. Carefully read this manual and store it safely for future use. Familiarise other residents of
the building with the operation of the detector.
Create an evacuation plan in case of re and perform a drill every month. All residents of the building
should be familiar with the detector signals in order to be able to immediately react to them. The
detector allows the detection of slow burning ames accompanied by thick black smoke. These
ames can take hours before they turn into a large re.
Warning:
If construction work causing a large amount of dust is taking place on your premises, you should
dismount the detector from the mounting plate to protect it from dirt. If you cannot do so for any
reason, cover the openings of the detector for the duration of work, by e.g. a plastic bag. A covered
detector will not detect smoke. Uncover it every day after work is nished.
Technical Information:
Sensor type: photoelectric cell
Service life: 10 years
Operating temperature and humidity: 0 °C to +40 °C, 5 to 95% (without condensation)
Enclosure: IP20
A
B
C
1.
2.
3.
4.
5.
D E
3
Acoustic signalisation: >85 dB at a distance of 3 m
Power supply: 1× 9 V (battery life 1 year)
Power consumption: <10 μA standby mode, <30 mA alarm mode
Smoke detection sensitivity: 0.109 to 0.160 dB/m
Dimensions: 90 × 35 mm
Weight: 65 g
Detector Description
A – LED
B – Main button
C – Loud siren
Installation
The installation must be performed by a qualied person.
The person performing the installation is responsible for installing the product in accordance with
valid regulations.
When in doubt, leave the installation to a qualied professional.
The detector is not designed for use in camper vans.
Ideally, a smoke detector should be installed in every room of the house with the exception of kitchens,
bathrooms and garages.
Each oor of the house, including the stairs, should have at least one smoke detector installed.
The smoke detector should be located in a place where you can hear it even when you are sleeping,
e.g. in the hall in front of the bedroom.
Install the detector on the ceiling of each bedroom and the hall in front of the bedroom.
If the hall is longer than 9 m, install a detector on both ends.
If you have a multi-storey house, install the detector in the same manner on each oor.
You will be protected even against smoke rising up the stairs from the bottom oor.
In the cellar, install the detector on the ceiling at the bottom of the stairs.
Do not install the detector in bathrooms or kitchens; the steam from water or food could cause
false alarms.
In the garage, the alarm could be triggered by the exhaust from your car.
The ventilation openings of the warning device must not be covered up.
Do not spray aerosol agents in the vicinity or onto the warning device.
Do not paint the warning device.
Pictures for Installation of the Detector:
1. Holes in the ceiling (wall); 2. Wall plugs; 3. Mounting plate; 4. Screws; 5. Detector
Installing the Device onto a Wall – Description
Drill two holes (ø 5 mm) into the wall (1.); the distance between the holes should be 60 mm.
Insert the attached wall plugs (2.) into the holes, place the mounting plate (3.) and attach it to the
wall using screws (4.). Insert and connect the battery to the detector (pictures D and E) and test its
functionality; see Test Mode.
If the detector is operational, place the rear side of the detector onto the mounting plate into the
two mounting pegs and turn it.
Note:
National regulations vary in terms of the number and location of smoke detectors.
When in doubt, contact for example the re brigade in your country.
Produktspezifikationen
| Marke: | EMOS |
| Kategorie: | Rauchmelder |
| Modell: | P56501 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit EMOS P56501 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Rauchmelder EMOS
6 September 2024
28 August 2024
16 August 2024
6 August 2024
4 August 2024
20 März 2024
19 März 2024
4 Juni 2023
Bedienungsanleitung Rauchmelder
- Blaupunkt
- Minute Man
- Honeywell
- ORNO
- Gloria
- BRK DICON
- TEF
- Chuango
- Vivanco
- FireHawk
- HQ
- Yale
- Siemens
- Fito Profi-line
- Ferguson
Neueste Bedienungsanleitung für -Kategorien-
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
11 Juni 2025
11 Juni 2025
10 Juni 2025
31 Mai 2025
31 Mai 2025