Endorphin.es Squawk Dirty To Me Bedienungsanleitung
Endorphin.es
Nicht kategorisiert
Squawk Dirty To Me
Lies die bedienungsanleitung für Endorphin.es Squawk Dirty To Me (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 28 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 14.5 Bewertungen. Hast du eine Frage zu Endorphin.es Squawk Dirty To Me oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
audio in
in 1
WARRANTY
RTFM – be so kind and read the manual. It will provide you with the
information you need to fully indulge the module you just
purchased – for which we like to thank you.
Enjoy your sound experiences, dear sonic traveller.
Beginning from the product's purchase date a 1-year warranty is
guaranteed for each product
in case of any manufacturing errors or other functional
deficiencies during runtime.
The warranty does not apply in case of:
• damage caused by misuse
• mechanical damage arising from careless treatment
(dropping, vigorous shaking, mishandling, etc.)
• damage caused by liquids or powders penetrating the device
• heat damage caused by overexposure to sunlight or heating
• electric damage caused by improper connecting
The warranty covers replacement or repair, as decided by us.
Please contact us via email for a return authorization before
sending anything. Shipping costs of sending a module back for
servicing is paid by the customer.
Device complies with all EU regulations concerning RoHS lead-free
manufacturing and WEEE disposal
Endorphin.es are made in Barcelona, Spain
Visit us:
http://endorphin.es
https://youtube.com/user/TheEndorphines
https://facebook.com/TheEndorphines
https://www.instagram.com/endorphin.es/
Drop us a line:
info@endorphin.es
FURTH BARCELONA, S.L.
VAT ID:ES B66836487
IN CASE OF EMERGENCY SQUAWK 7700
• simple and effective 6hp stereo VCF
• 8 filter modes available with meta CV scanning,
famous zero-delay feedback Grand Terminal filters
• additional hi-pass filter in series quickly cuts the
boomy low end
• 48 kHz 16 bit digital audio stereo processing
Depth: 30mm (with plugged ribbon cable)
Power requirements: +12V: 120 mA
-12V: 15 mA
Power OFF you modular system:
Hold ‘mode’ while powering your system again:
You will see status LED
will blink blue:
WAV
Connect the audio output from your computer
headphones output to one of the audio inputs
of the module with simple mono or stereo cable
Press PLAY and wait 1.5 minutes.
The module will reboot automatically
after the new firmware was installed
mode
Make sure you don't input any extra
sounds during update process
(reminder signals from your calendar,
etc.). When status LED flashes RED –
that means signal is too low or too high
– just reset the firmware aquire process
by pressing MODE once.
Download latest firmware/bank
when available from:
http://airways.endorphin.es
mode
FIRMWARE UPDATE
Red/brown pair
or wires correspond
to a negative -12V
power connector.
Connect to the
power bus board.
Rear side of the module
Connect to
the module
from the
backside.
POWER CONNECTION
-12V / red stripe
polarity marking
hold
for
meta
cv in
VCA cv in
hpf
mode
cv in
SQWK DIRTY
I
out 1 out 2
in 1 in 2
II III IV
audio
audio
V VI VII VIII
cv in
Audio inputs:
input 1 internally
connected to input 2,
if nothing is
plugged into input 2
Filter outputs
Cutoff frequency control with CV
sets the frequency peak where
filter starts to cut
Resonance control and CV
adjusts the emphasis
(resonance peak) of the
frequency, or in some other
cases bandwidth,
vactrols’ decay etc..
Manual cutoff, resonance
and hpf knobs act
as attenuators when
a CV signal is is applied
to the cv inputs.
Pressing the MODE button shortly
cycles thru all filter types.
Long MODE press enables
meta filter scannin.
Unattenuated CV input
for VCA (post-filter):
range 0...+5v
Attenuator for CV
for high-pass filter
CV input for hpf:
range 0...+5v
Status LED used for
update etc.
4 white LEDs show currently
chosen one of 8 filters:
• when LED is semi LIT, then it
shows one of V...IV chosen filter types
• when LED is full LIT, then it
shows one of I...IV chosen filter types
Produktspezifikationen
| Marke: | Endorphin.es |
| Kategorie: | Nicht kategorisiert |
| Modell: | Squawk Dirty To Me |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Endorphin.es Squawk Dirty To Me benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Endorphin.es
16 August 2024
15 August 2024
12 August 2024
12 August 2024
11 August 2024
11 August 2024
7 August 2024
7 August 2024
23 Mai 2024
Bedienungsanleitung Nicht kategorisiert
- Cabasse
- Formuler
- Devialet
- Royal Range
- Lovense
- Nimble
- Apollo Design
- Cata
- Dario
- Eta
- Abuki
- Klauke
- ISpring
- Allibert
- Ocean Matrix
Neueste Bedienungsanleitung für -Kategorien-
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026