Epcom X6465A Bedienungsanleitung
Epcom
Nicht kategorisiert
X6465A
Lies die bedienungsanleitung für Epcom X6465A (3 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 10.5 Bewertungen. Hast du eine Frage zu Epcom X6465A oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/3
A low prole LED beacon with a long, maintenance-free
service life. These beacons are ideal for industrial vehicle
applications and feature a 12-80 VDC operating range.
Do not install and/or operate this safety product unless you have read and understand the
safety information contained in this manual.
1. Proper installation combined with operator training in the use, care, and maintenance of emergency warning devices
are essential to ensure the safety of you and those you are trying to protect.
2. Exercise caution when working with live electrical connections.
3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause
high current arcing, which can cause personal injury and/or severe vehicle damage, including re.
4. Proper placement and installation are vital to the performance of this warning device. Install this product so that output
performance of the system is maximized and the controls are placed within convenient reach of the operator so that
s/he can operate the system without losing eye contact with the roadway.
5. It is the responsibility of the vehicle operator to ensure during use that all features of this product work correctly. In
use, the vehicle operator should ensure the projection of the warning signal is not blocked by vehicle components (i.e.,
open trunks or compartment doors), people, vehicles, or other obstructions.
6. The use of this or any other warning device does not ensure all drivers can or will observe or react to a warning signal.
Never take the right-of-way for granted. It is your responsibility to be sure you can proceed safely before entering an
intersection, driving against trafc, responding at a high rate of speed, walking on or around trafc lanes.
7. This equipment is intended for use by authorized personnel only. The user is responsible for understanding and obey-
ing all laws regarding warning signal devices. Therefore, the user should check all applicable city, state, and federal
laws and regulations. The manufacturer assumes no liability for any loss resulting from the use of this warning device.
WARNING!
Failure to install or use this product according to manufacturer’s recommendations may result in property
damage, serious bodily/personal injury, and/or death to you and those you are seeking to protect!
!
Page 1 of 3
Installation and Operation Instructions
LED Beacon
Produktspezifikationen
| Marke: | Epcom |
| Kategorie: | Nicht kategorisiert |
| Modell: | X6465A |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Epcom X6465A benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Epcom
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
Bedienungsanleitung Nicht kategorisiert
- Riviera & Bar
- Brady
- OnTruss
- Heller
- Irradio BelAir
- Crystal Video
- Valore
- Pocketalk
- CYP
- Noyafa
- HDFury
- Exo-Terra
- Iluv
- Bébé Confort
- Schaudt
Neueste Bedienungsanleitung für -Kategorien-
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026