Epson Perfection 1270 Bedienungsanleitung

Lies die bedienungsanleitung für Epson Perfection 1270 (2 Seiten) kostenlos online; sie gehört zur Kategorie Scanner. Dieses Handbuch wurde von 50 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 25.5 Bewertungen. Hast du eine Frage zu Epson Perfection 1270 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Epson Perfection 1270

Please read these instructions before using the product.

Unpack Your Scanner

1Make sure you have everything for your Epson scanner:

2Remove all packing tape, but leave the large sticker in place.

Install the Software

Wait! Install your software before connecting the scanner to your computer.

1Insert the scanner software CD-ROM in the CD-ROM or DVD drive.

If the installer does not start automatically, do the following:

•Windows XP: Start > My Computer > Epson.

•Windows 98, Me or 2000: My Computer > > Epson Epson.

2Follow the on-screen instructions to install the scanner software and

Reference Guide. Note that EPSON Smart Panel™installs in several steps.

Note: If you’re using Windows 98 and you see a message asking if you’d like

to restart your system, select No, I will restart my system later.

3At the end of the installation, click Exit.

4When you see the Product Registration screen, register your scanner on-line

as instructed.

Connect the Scanner

1Remove the sticker covering the transportation lock on the bottom of the

scanner. Then slide the lock to the unlock position, as shown below.

Caution: Do not turn the scanner over; this may damage the scanner.

2Remove the yellow

sticker.

3Connect the power cord and AC adapter, as shown. Then connect the AC

adapter to the scanner and plug the other end of the power cord into a

grounded electrical outlet.

Caution:

•It is not possible to change the AC adapter’s input or output voltage. If the

label on the AC adapter does not show the correct voltage, contact your

dealer. Do not plug in the power cord.

•Whenever you unplug the scanner, wait at least 10 seconds before

plugging it back in to avoid damaging it.

The scanner turns on and the ] Start button light flashes green. It stops

flashing and turns green when the scanner is ready.

4Plug the USB cable to the scanner, then to your computer as shown below.

Note: Your scanner may not work correctly if you use a USB cable other than

the one supplied by Epson or if you connect your scanner to a hub system.

5Restart your system, then remove the CD-ROM.

Scanner Basics

Your First Scan

The ] Start button on your scanner opens

Smart Panel. Here’s how you can use this

button and Smart Panel to scan photos

and save them as files.

1Raise the scanner cover and place

your photo face down on the glass.

Place the document against the

front edge of the scanner glass

and center it on the arrow,

as shown.

Then close the cover.

2Press the ] Start button on your

scanner.

Note: If you see a message the

first time you press the ] Start

button, select EPSON Smart

Panel for Scanner, click Always

use this program for this

action, then click OK.

® ®

USB cable

Power cord and AC adapter

Perfection 1270

Software

IMPORTANT!

Leave the sticker in

place until you are

instructed to remove it

Remove

Start Here

Produktspezifikationen