Epson WorkForce Pro WP-4010 Bedienungsanleitung

Epson Drucker WorkForce Pro WP-4010

Lies die bedienungsanleitung für Epson WorkForce Pro WP-4010 (4 Seiten) kostenlos online; sie gehört zur Kategorie Drucker. Dieses Handbuch wurde von 23 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 3 Bewertungen. Hast du eine Frage zu Epson WorkForce Pro WP-4010 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
Start Here
Read these instructions before using your printer.
1Unpack
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all tape and protective materials, including the foam and
plastic inside the printer.
2Turn on
1 Connect the power cord to the back of the printer and to an
electrical outlet.
Do not connect to your computer yet.Caution:
2Press the power button.
3Install ink cartridges
1 Open the front cover.
2Unpack the four ink cartridges.
3 Shake each cartridge as shown for about 5 seconds.
4 Install each cartridge in the correct slot for its color.
Push each cartridge in until it clicks.
5 Close the front cover.
The printer starts priming the ink. This takes about 12
minutes. When the green power light stops flashing,
priming is complete.
Note: The included cartridges prime the printer and print about 1000
black pages/900 color pages. Actual page count will vary.
Caution: Don’t turn off the printer or open the cover while it is
priming or you’ll waste ink.
*412238700*
*412238700*
WorkForce® Pro WP-4010 Series

Bewerten Sie dieses Handbuch

4.0/5 (3 Bewertungen)

Produktspezifikationen

Marke: Epson
Kategorie: Drucker
Modell: WorkForce Pro WP-4010

Brauchst du Hilfe?

Wenn Sie Hilfe mit Epson WorkForce Pro WP-4010 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten