Erica Synths Black High Pass VCF Bedienungsanleitung

Lies die bedienungsanleitung für Erica Synths Black High Pass VCF (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 80 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 40.5 Bewertungen. Hast du eine Frage zu Erica Synths Black High Pass VCF oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

BLACK

HIGH PASS VCF

THANK YOU FOR PURCHASING

ERICA SYNTHS BLACK SERIES MODULE!

Erica Black Series include high-end, unique functionality and superior quality

modules. Only the best, highest quality components are used, all inputs and

outputs are protected against undesired overvoltage. When designing Black

Series, put design and usability superior. Big knobs are assigned to functions that

make dierence in sound. Erica Black series consist of range of modules that are

needed to put together entire synth. Enjoy!

The Erica Synths Black High Pass VCF is designed for analogue purists, how take

sound design seriously. It’s highly stable, 24dB/oct resonant high pass VCF with

voltage control over cuto (two CV inputs, one is with an attenuverter) and

resonance. Bonus features are built in post-filter overdrive circuit with user

adjustable drive amount and the Black Filter Coupler connector. When used in

combination with the Black Low Pass VCF and the Black Filter Coupler, you get a

Holy Trinity of VCFs for an ultimate analogue modular system.

FEATURES:

Voltage control over cuto and resonance

Gain loss compensation on high resonance

Cuto CV attenuverter

Built in adjustable overdrive circuit

CUTOFF

This is the main control of the module – manual cuto

frequency adjustment. The incoming CV is added to the

cuto knob position

RESONANCE

Adjust the resonance level manually. On settings over

1PM the filter will start to self-oscillate . The incoming CV

is added to the resonance knob position

CV1 LEVEL

This is cuto CV attenuverter. Adjust the CV level to your

taste!

RESO CV LEVEL

Adjust the resonance CV level to your taste

CV1; CV2

These are the cuto CV inputs. The CV1 level is

adjustable by CV1 LEVEL attenuverter knob, CV2 is

applied to the cuto without attenuation

INPUT

Patch your audio signals here.

OUT

This is the audio output of the module

IN LEVEL

Adjust the audio signal level

DRIVE

For extreme results, flip the DRIVE switch ON! This will

apply post-filter drive. You can preset drive level to your

taste by adjusting a trimpot close to the switch on the

back side of the module

RESO CV IN

This is the resonance CV input.

SPECS:

Audio level10Vptp

CV level -10V - +10V

Filter slope24dB/oct

Power consumption+25mA; -29mA

Module width10HP

Module depth35mm

CUTOFF

IN LEVEL

CV1 LEVEL

RESONANCE

RESO CV LEVEL

INPUT CV1CV2OUT

BLACK HIGH PASS VCF

RESO CV IN

ON

OFF

DRIVE

Produktspezifikationen