Ernitec 0070-08215 Bedienungsanleitung

Ernitec Überwachungskamera 0070-08215

Lies die bedienungsanleitung für Ernitec 0070-08215 (2 Seiten) kostenlos online; sie gehört zur Kategorie Überwachungskamera. Dieses Handbuch wurde von 50 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 25.5 Bewertungen. Hast du eine Frage zu Ernitec 0070-08215 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/2

2.2 Camera Dimensions

Figure 2-2 Dimensions (Unit: mm)

Special Announcement

For more information, please refer to website.

Fully understand this document before using this device,

and strictly observe rules in this document when using this

device. If you install this device in public places, provide the

tip "You have entered the area of electronic surveillance" in

an eye-catching place. Failure to correctly use electrical

products may cause fire and severe injuries.

Ÿ Strictly observe installation requirements when installing

the device. The manufacturer shall not be held responsible

for devic

e damage caused by users' non-conformance to

these requirements.

Ÿ Strictly conform to local electrical safety standards and use

power adapters that are marked with the LPS standard

when installing and using this device. Otherwise, this

device may be damaged.

Ÿ Use accessories delivered with this device. The voltage

must meet input voltage requirements for this device.

Ÿ If this device is installed in places with unsteady voltage,

ground this device to discharge high energy such as

electrical surges in order to prevent the power supply from

burning out.

Ÿ When this device is in use, ensure that no water or any

Ÿ Avoid heavy loads, intensive shakes, and soaking to

prevent damages during transportation and storage. The

warranty does not cover any device damage that is caused

during secondary packaging and transportation after the

original packaging is taken apart.

Ÿ Protect this device from fall-down and intensive strikes,

keep the device away from magnetic field interference, and

do not install the device in places with shaking surfaces or

under shocks.

Ÿ Clean the device with a soft dry cloth. For stubborn dirt, dip

e cloth into slight neutral cleanser, gently wipe the dirt

with the cloth, and then dry the device.

Ÿ Do not jam the ventilation opening. Follow the installation

instructions provided in this document when installing the

device.

Ÿ Keep the device away from heat sources such as radiators,

electric heaters, or other heat equipment.

Ÿ Keep the device away from moist, dusty, extremely hot or

cold places, or places with strong electric radiation.

Ÿ If the device is installed outdoors, take insect- and

moisture-proof measures to avoid circuit board corrosion

that can af

fect monitoring.

Ÿ Remove the power plug if the device is idle for a long time.

Ÿ Before unpacking, check whether the fragile sticker is

damaged. If the fragile sticker is damaged, contact

customer services or sales personnel. The manufacturer

shall not be held responsible for any artificial damage of the

fragile sticker.

Ÿ All complete products sold by the manufacturer are

delivered along with nameplates, quick setup guide and

accessories after strict inspection. The manufacturer shall

not be held responsible for counterfeit products.

Ÿ The manufacturer will update this manual according to

product function enhancement or changes and regularly

update the software and hardware described in this manual.

Update information will be added to new versions of this

manual without prior notice.

Ÿ This manual may contain misprints, technology information

that is not accurate enough, or product function and

operation description that is slightly inconsistent with the

actual product, the final interpretation of company is as a

standard.

Ÿ This manual is only for reference and does not ensure that

the informati

on is totally consistent with the actual product.

For consistency, see the actual product.

Precautions

Open the package, check the appearance of product for no

obvious damage, and confirm the item list for t

able 1-1 is

consistent.

Table 1-1 Packing list

2.1 Device Ports

Different devices may have different ports, multi-head cables,

and fill lights; Please refer to the actual product.

Different devices may have different dimensions; Please

refer to the actual product.

NOTE

liquid flows into the device. If water or liquid unexpectedly

flows into the device, immediately power off the device and

disconnect all cables (such as power cables and network

cables) from this device.

Ÿ Do not focus strong light (such as lighted bulbs or sunlight)

on this device. Otherwise, the service life of the image

sensor may be shortened.

Ÿ If this device is installed in places where thunder and

lightning frequently occur, ground the device nearby to

discharge high energy such as thunder strikes in order to

prevent device damage.

It alerts you to moderate dangers which, if not

avoided, may cause minor or moderate injuries.

It alerts you to risks. Neglect of these risks may

cause device damage, data loss, device

performance deterioration, or unpredictable

results.

It provides additional information.

NOTE

CAUTION

WARNING

CAUTION

Device Structure

pen Package Examination

Bullet Network Camera

Quick Setup Guide

Accessory Package

Installation Location Sticker

Component

Quantity

Remark

Figure2-1 Multi-head cable

Table 2-1 Multi-head cable description

Figure 2-3 Install SD card

Port

Connect to a standard Ethernet

cable or PoE. The green light is on,

the network connection is normal;

The yellow light flashes when the

data is transmitted. Some models

maybe not have the lights; Please

refer to the actual product.

Connect to an external audio

device such as a speaker.

Applied for

camera with

audio

function

Receive an analog audio signal

from devices such as a sound

pickup device.

Connect to a 12V direct current

(DC) power supply.

Alarm output COM

Applied for

alarm

function

Alarm output terminal

Alarm input COM

Alarm input terminal

Network

access port

Support PoE

supply.

Core

Description

Remark

Audio output

Power supply

(DC 12V)

Audio input

port

OUT

Reset

PWR SD

2-1/4UNC x8

4-φ4.5

100

275

107

273~~303 ajuﬆable

Pedestrian direction

15°

If user requires higher

accuracy of personnel count,

we recommend the user to

install camera and draw the

line following as ﬁgure 2-4.

Figure 2-4 Installation of personnel count

CAUTION

Deimos Pro Network Camera

5MP Vari-Focal Lens with

IR-Active Deterrence

Quick Setup Guide

Item no.: 0070-08215

Produktspezifikationen

Marke:	Ernitec
Kategorie:	Überwachungskamera
Modell:	0070-08215
Eingebautes Mikrofon:	Ja
Eingebaute Lautsprecher:	Ja
Unterstützte Audioformate:	G.711
Gewicht:	1250 g
Produktfarbe:	Weiß
Internationale Schutzart (IP-Code):	IP66
Übertragungstechnik:	Kabelgebunden
Energiequelle:	DC, PoE
Befestigungstyp:	Wand
Betriebstemperatur:	-40 - 55 °C
Paketgewicht:	2100 g
Netzstandard:	IEEE 802.3af
Unterstützte Netzwerkprotokolle:	IPv4/IPv6, 802.1x, HTTP, HTTPS, TCP/IP, UDP/IP, RTSP, DHCP, NTP, RTCP/RTP, PPPoE, SMTP, DNS, UPnP, FTP, ARP, SNMP, TLS/SSL
Zertifizierung:	CE/FCC
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Typ:	IP-Sicherheitskamera
Stromverbrauch (max.):	13.5 W
Gehäusematerial:	Metall
Zahl der Benutzer:	10 Benutzer
Audio Kanäle:	1 Kanäle
Full-HD:	Ja
Geräuschunterdrückung:	Ja
Größe des Bildsensors:	1/2.8 "
Schwenkbereich:	0 - 360 °
Neigungswinkelbereich:	0 - 90 °
Formfaktor:	Bullet
Kompatible Speicherkarten:	SD
Max. Speicherkartengröße:	256 GB
Webbrowser:	Ja
Integrierter Kartenleser:	Ja
Maximale Auflösung:	2592 x 1944 Pixel
Reset-Knopf:	Ja
Megapixel insgesamt:	5 MP
Maximaler Arbeitsabstand:	40 m
Anzahl der Kameras:	1
Mindestbeleuchtung:	0.03 Lux
Sensor-Typ:	CMOS
Verschlusstyp:	Electronic, Mechanical
Weißabgleich:	Auto, Manual
Bildqualitätsanpassung:	Brightness, Contrast, Mirror, Saturation, Sharpness
Drehungswinkel:	360 °
Kamera Verschlusszeit:	/5 ~ 1/20.000 s
Geräuschunterdrückungstechnologie:	2D noise reduction, 3D noise reduction
Datenschutz-Maskierung:	Ja
Gegenlichtkompensation:	Ja
Highlight-Kompensation (HLC):	Ja
Smart-IR:	Ja
Video-Bewegungsmelder:	Ja
Kameraschwenkkontrolle:	Ja
Kamera-Schwenksteuerung:	Ja
Betrachtungswinkel (horizontal):	87.5 - 26 °
Betrachtungswinkel (vertikal):	64.8 - 19.9 °
Audio input Kanäle:	1 Kanäle
Streaming-Verfahren:	Unicast
Benutzer-Zugriffsebene:	Benutzer
Alarm-Eingangskanäle:	1
Alarm-Ausgangskanäle:	1
Klassifizierung von menschlichen und Fahrzeugzielen:	Ja
Ethernet/LAN:	Ja
Megapixel pro Objektiv:	5 MP
Unterstützte Positionierung:	Innen & Außen
Signal-Rausch-Verhältnis (SNR) (Panoramakamera):	55 dB
Bitrate-Steuerung (Panoramakamera):	Constant Bit Rate (CBR), Variable Bit Rate (VBR)
Brennweitenbereich (Panoramakamera):	2.7 ~ 13.5 mm