Escort Shifter ZR3 Bedienungsanleitung
Escort
Nicht kategorisiert
Shifter ZR3
Lies die bedienungsanleitung für Escort Shifter ZR3 (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 2 Bewertungen. Hast du eine Frage zu Escort Shifter ZR3 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/6
SHIFTER ZR3 is designed in the USA by
Escort Inc.
5440 West Chester Road
West Chester, Ohio 45069
Sales/Service 800-964-3143
Fax 513-870-8509
www.escortradar.com
©2002 Escort Inc. Escort
®
, Passport
®
, and Laser Shifter
™
are trademarks of Escort Inc.
Features, specifications and prices subject to change without notice.
POWERFRONT REAR
VOL OFF
MUTE
™
L A S E R D E F E N S E S Y S T E M
L S T I RASER HIFTING ECHNOLOGY / PROFESSIONAL NSTALLATION EQUIRED
BY
Owner’s Manual
BY
L A S E R D E F E N S E S Y S T E M
Congratulations and Important Warning
Congratulations
Your new Shifter ZR3 is the most advanced
defense system against targeting laser guns.
The Shifter ZR3 includes (2) front-mounted
and (1) rear license plate mounted laser
transceivers, interface module, display
controller with audible and visual alerts, and
a remote mute button.
In addition, your new Shifter ZR3
introduces a new level of Laser defense
including:
• Visual indicators for front and rear signals
• Volume adjustment
• Self-test diagnostics mode with error
indication
• Standard remote mute button provides
one-touch mute and manual “receive only”
mode.
• High-Speed A/D converter dramatically
improves laser detection range
Please read the manual in detail to get
the most out of your new Shifter’s
performance and features.
Please drive safely.
PLEASE NOTE:
This product may be limited or prohibited
in some jurisdictions. Check applicable laws
before using.
IMPORTANT INSTALLATION WARNING:
The Shifter ZR3 requires professional
installation. New car dealers, and a select
group of car audio specialists can install the
Shifter ZR3 for you. Call us toll-free at
1-800-964-3143, or visit our website at
www.escortradar.com for an authorized
dealer near you.
Attempting to install the Shifter ZR3
without expertise in automotive electronic
installations can cause personal injury
during the installation, or can damage your
Shifter or your vehicle. If your vehicle is
damaged during installation, its safety
systems may be compromised, which could
cause personal injury or property damage.
Table of Contents
Introduction
• Congratulations I
• Important Warning I
• Quick Reference Guide 2
Controls and Features 3-5
• Laser Transceivers 3
• Power and Volume Control 3
• Power-on Indication 3
• Mute/Remote Mute Button 3
• Receive Only Mode 3
• Display Brightness 4
• Alerts 4
• Diagnostics/Error Indications 4
• Optional Passport 8500 Configuration 5
Technical Details 6-7
• Specifications 6
• How Laser Works 7
Service 8-9
• Troubleshooting 8
• Service 9
• Accessories 9
• Warranty 9
1
I
POWERFRONT REAR
VOL OFF
MUTE
Power/Volume Control
Rotate the thumbwheel to turn the Shifter
on and set the volume. (We recommend
wiring the Shifter to a switched circuit so
that it will turn on/off with your vehicle’s
ignition).
Front Signal Indication
Flashing LED (red) provides visual alert for
incoming laser signals received from the
front of the vehicle.
Power On Indication
Single LED (green) provides power-on and
self-diagnostics indication.
Automatic Brightness Control
A built-in photocell will adjust the display
brightness automatically based on the
ambient light in the vehicle.
Mute Button
Briefly press this button on the display
controller, or the standard remote mute
button, to silence the audio for a specific
alert. (The audio will alert you to the next
encounter.) Press the mute button twice
during an alert for manual “receive only”
mode.
Rear Signal Indication
Flashing LED (red) provides visual alert for
incoming laser signals received from the
rear of the vehicle.
Quick Reference Guide
2 3
Laser Transceivers
Your Shifter ZR3 is equipped with a total of
three (2 front, 1 rear) laser transceivers.
These highly sensitive laser transceivers will
detect a laser signal, and respond (or
transmit) a pulsed signal back in order to
“Shift” or confuse the targeting laser gun.
These highly sensitive transceivers
must have a clear view of the road, and
must be installed parallel to the road and
aimed correctly in order to work properly.
See Installation Manual for complete details.
Power and Volume Control
To turn the Shifter on and adjust the alert
tone volume level, rotate the thumbwheel
on Shifter's Display/Controller. Turn the
volume control knob to the left to increase
the audio volume. When you turn the
Shifter on, it will go through a sequence of
alerts and verify communication to the laser
transceivers.
Power-On Indication
After the Shifter’s start-up sequence is
complete, the pilot LED (green) will stop
flashing, informing you that the system is
turned on and functioning properly.
Mute/Remote Mute Button
The Mute Button, located on Shifter’s front
panel, or the installed Remote Mute Button,
allows you to silence the audio alert during
a laser encounter.
To mute the
audio, briefly
press the Mute
Button or the
installed Remote
Mute Button once.
After that laser encounter has passed,
the mute will automatically reset and
the audio will alert you to the next
encounter.
Manual “Receive Only” Mode
The Remote Mute button can also be used
to manually shut off the laser transceivers
once you have corrected your speed. Since
some laser guns provide “jamming” codes
for the officer, this can be useful to avoid
any undue attention.
Simply press the installed Remote Mute
Button, or the mute button located on the
Display Controller twice during a laser alert.
All Shifters will cease to transmit, and the
alert LED will stop flashing and remain on.
This indicates that you are now in “receive
only” mode.
The Shifters remain in the “receive
only” mode for approximately sixty
seconds, giving you time to pass the speed
trap. Once this time has expired, the alert
LED will turn off, and a double beep tone
will be given, indicating that the Shifters are
now back in the “active” mode.
Controls and Features
Produktspezifikationen
| Marke: | Escort |
| Kategorie: | Nicht kategorisiert |
| Modell: | Shifter ZR3 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Escort Shifter ZR3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Escort
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
Bedienungsanleitung Nicht kategorisiert
- Quik Lok
- Perfect Christmas
- Vivo
- Ruark Audio
- Biohort
- Garden Feelings
- Heitech
- Iluv
- Deltaco Gaming
- Tescoma
- Deaf Bonce
- Positive Grid
- Hawk-Woods
- Weihrauch Sport
- Aiphone
Neueste Bedienungsanleitung für -Kategorien-
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025
11 Juli 2025