ETC Source 4WRD II Bedienungsanleitung

ETC Nicht kategorisiert Source 4WRD II

Lies die bedienungsanleitung für ETC Source 4WRD II (28 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 24 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 12.5 Bewertungen. Hast du eine Frage zu ETC Source 4WRD II oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/28
Source 4WRD II
HPL to LED Retrofit (CE)
Installation and User Manual
Version 2.0.0
Part Number: 7067M1210-2.0.0 Rev B
Released: 2021-05
To view a list of ETCtrademarks and patents, go to
et
et
et
etetccon
ccon
ccon
cconcconn
n
n
nnect.co
ect.co
ect.co
ect.coect.com/i
m/i
m/i
m/im/ip
p
p
pp(missing or bad snippet). All other trademarks,
both marked and not marked, are the property of their respective
owners.
ETC intends this document, whether printed or electronic, to be
provided in its entirety.
Table of Contents
Sou rce 4WRD II Installation and User Manual i
Introduction 1
Help from ETC Technical Services 2
Safety 3
Retrofit the Fixture 5
Wire the Power Connector 5
Remove Incandescent Lamp Housing 6
Install the Source 4WRD II Retrofit 7
Install the Fixture 9
Attach Hanging Clamp and Safety Cable 9
Connect Cables 10
Configure the Fixture 13
RDMValues 13
Focus the Fixture 14
Set the Z-adjustment 14
Adjust the Yoke Position 15
Shape the Beam 16


Produktspezifikationen

Marke: ETC
Kategorie: Nicht kategorisiert
Modell: Source 4WRD II

Brauchst du Hilfe?

Wenn Sie Hilfe mit ETC Source 4WRD II benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten