EtherWAN EL8020 Bedienungsanleitung
EtherWAN
Audio/Video-Konverter
EL8020
Lies die bedienungsanleitung für EtherWAN EL8020 (2 Seiten) kostenlos online; sie gehört zur Kategorie Audio/Video-Konverter. Dieses Handbuch wurde von 19 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 10 Bewertungen. Hast du eine Frage zu EtherWAN EL8020 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
W70G-EL8100XQ3 Page 1
Installation Guide
EL8020/EL8100 Series | Hardened Media Converter
Copyright 2025 EtherWAN Systems, Inc. All Rights Reserved 05/15/2025
Relay
contact
PW1
PW2
Point
1 - 2
Point
2 - 3
Alarm
Off
Off
Closed
Open
Alarm
Off
On
Closed
Open
Alarm
On
Off
Closed
Open
Non-Alarm
On
On
Open
Closed
LED
State
Indication
Fault
Steady
Power redundancy or
port malfunction
Off
Power redundancy/ports
functioning normally
PW1
Steady
PW1 on
Off
PW1 off
PW2
Steady
PW2 on
Off
PW2 off
LNK/ACT
Steady
Connection established
Flashing
Transmitting or
receiving data
Off
No connection established
LFPT
Steady
LFPT function enabled
Off
LFPT function disabled
1 Unpacking
Open the carton and unpack the items. Your package
should include an EL8020 or EL8100 media converter
and this Quick Install Guide. If items are missing or
damaged, notify your EtherWAN representative.
Download the full manual at:
https://www.etherwan.com
2 Select Installation Location
Installation is DIN rail-mount, or wall mount (in an
enclosure or industrial panel). Ensure that the power
source is within 6 feet (1.8 meters), and check that
there is adequate airflow.
Place the media converter on the DIN rail from above
using the slot. Push the front of the media converter
toward the mounting surface until it audibly snaps
into place.
3 Connect Power
The media converter is equipped with an eight-
contact terminal block. The terminal block provides
dual DC power inputs, and a relay output contact.
Redundant power supply is supported, but only one
power input is required for operation. Note that the
media converter does not have a power switch; it is
turned on/off by connecting/disconnecting power.
Input voltage is 12 to 48VDC.
The power consumption under full load is as follows:
▪ 12~48VDC, 0.12~0.03A
Note: Use qualified power supply that is SELV rated,
or double insulation of UL 60950 or UL 61010-1 or UL
61010-2-201 standards.
Insert the DC input wires into the corresponding
terminals, and tighten the clamp screws to hold
them in place. Make sure that the plastic terminal
block connector prongs are plugged firmly into the
terminal block receptacles.
4 Relay Output Alarm
The media converter is equipped with relay output
contacts on the terminal block for signaling of a power
or port failure. The relay output can be connected to
an alarm signaling device. Current is 0.6A @ 30VDC.
5 Front Panel Reference
6 LED Indicators
Produktspezifikationen
| Marke: | EtherWAN |
| Kategorie: | Audio/Video-Konverter |
| Modell: | EL8020 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit EtherWAN EL8020 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Audio/Video-Konverter EtherWAN
5 November 2025
4 November 2025
4 November 2025
4 November 2025
3 November 2025
2 November 2025
2 November 2025
2 November 2025
2 November 2025
1 November 2025
Bedienungsanleitung Audio/Video-Konverter
- C2G
- Comprehensive
- RCF
- Key Digital
- PAC
- Yamaha
- Intelix
- Steren
- ATen
- Manhattan
- CE Labs
- Evolution
- Advantech
- Kanex
- Data-Tronix
Neueste Bedienungsanleitung für -Kategorien-
24 Dezember 2025
9 Dezember 2025
3 Dezember 2025
3 Dezember 2025
1 Dezember 2025
1 Dezember 2025
29 November 2025
26 November 2025
19 November 2025
18 November 2025