EtherWAN ER58000 Bedienungsanleitung
Seiten 2 Schalter
Lies die Bedienungsanleitung für EtherWAN ER58000 kostenlos online oder lade das PDF herunter. 14 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
Copyright 2014 EtherWAN Systems, Inc. Page 1
All Rights Reserved
ER58000 rev. 1.0
12/2/2014
1 Unpacking
Unpack the items. Your package should include:
One ER58000 Series hardened managed
switch
Rack-mounting hardware brackets
One CD containing this user’s guide
If items are missing or damaged, notify your
EtherWAN representative. Keep the carton and
packing material.
2 What Else You Need
Appropriate cables for data ports
Personal computer or laptop
3 Select a Location
Desktop installations: Mount on a flat table
or shelf surface.
Rack installations: Use a 19-inch (48.3-
centimeter) EIA standard equipment rack
that is grounded and physically secure.
Identify a power source within 6 feet (1.8
meters).
Choose a dry area with ambient temperature
between -40 and 75ºC (-40 and 167ºF).
Be sure there is adequate airflow.
4 Connect to the Data Ports
Your switch has the following ports:
8 10/100Base-M12 D-Code 4-pin female ports
2 Gigabit-M12 A-Code 8-pin female/LC ports
10/100Base-M12 Ports
These ports support Power over Ethernet (PoE).
They conform to IEEE802.3at and provide up to
30W per port, with a total power budget of
120W. Use these ports to connect to devices such
as an IP surveillance camera or a Voice Over
Internet Protocol (VoIP) phone.
Gigabit-M12 Ports
These ports come as 10/100/1000Base-TX,
1000Base-SX, or 1000Base-LX interfaces.
These ports can connect to network devices such
as a computer, printer, network video recorder
(NVR), network storage, or they can connect to
the network itself. Wear an ESD-preventive wrist
strap before connecting to these ports.
5 Apply DC Power
The switch supports two sets of power supplies —
power input 1 and power input 2.The M23 6-pin
male connector on the front panel is used for the
dual power inputs. Use a power cord with an M23
6-pin female connector to connect the power
inputs to the switch.
Pin
Description
Power 2
24-48VDC
Power Ground
Power 1
24-48VDC
Power Ground
Earth Ground
Relay Output Rating
1A @ 250VAC
Pin
Description
1
PWR1 Live / DC + (24-48VDC)
2
PWR1 Neutral / DC -
3
Chassis Ground
4
PWR2 Neutral / DC -
5
PWR2 Live / DC + (24-48VDC)
ER58000 Series Hardened Managed Ethernet Switch
Installation Guide
Continued on next page
Produktspezifikationen
| Marke: | EtherWAN |
| Kategorie: | Schalter |
| Modell: | ER58000 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit EtherWAN ER58000 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schalter EtherWAN
EtherWAN EX26484 V2 Bedienungsanleitung EtherWAN EX41941 Bedienungsanleitung EtherWAN EX17242 Bedienungsanleitung EtherWAN EX27000 Bedienungsanleitung EtherWAN ER59000 Bedienungsanleitung EtherWAN EG97023 Bedienungsanleitung EtherWAN EX78162 Bedienungsanleitung EtherWAN EX78900E Bedienungsanleitung
Alle EtherWAN Schalter Bedienungsanleitungen
Beliebt in Schalter
EtherWAN EX73900X Bedienungsanleitung EtherWAN EX77000 Bedienungsanleitung EtherWAN EX78900G Bedienungsanleitung
Bedienungsanleitung Schalter
Neueste Bedienungsanleitungen für Schalter
Legrand TSD703PTUI Bedienungsanleitung Dell N1548 Bedienungsanleitung Dell N1524P Bedienungsanleitung Advantech EKI-2716EI-A Bedienungsanleitung Legrand TSDCL303PW Bedienungsanleitung Legrand TSDSSL7AP Bedienungsanleitung Legrand TSD4FBL3P Bedienungsanleitung Legrand TSDCL303PTC Bedienungsanleitung Legrand TSD4FBL3PW Bedienungsanleitung Legrand TSDCL303PI Bedienungsanleitung