EtherWAN EX41941F Bedienungsanleitung
EtherWAN
Netzwerkkarte / Adapter
EX41941F
Lies die bedienungsanleitung für EtherWAN EX41941F (2 Seiten) kostenlos online; sie gehört zur Kategorie Netzwerkkarte / Adapter. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu EtherWAN EX41941F oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
Copyright 2022 EtherWAN Systems, Inc. Page 1
All Rights Reserved
EX41941
8/2/2022
EX41941 Hardened PoE Switch
Installation Guide
1 Unpacking
Unpack the items. Your package should
include:
One EX41941 PoE switch
Power input terminal block
Wall and DIN-Rail mounting hardware
brackets
If items are missing or damaged, notify your
EtherWAN representative. Keep the carton
and packing material.
More information available at:
https://www.etherwan.com/us
For warranty information, visit:
https://www.etherwan.com/us/support/war
ranty-policy
2 Equipment Needed
Category 5e or better cable for RJ-45
ports
48VDC power supply with voltage
adjustable up to 56VDC and power output
to handle 120W PoE power budget.
3 Select a Location
DIN-rail installations: Attach the bracket
on the unit using the included screws and
then mount on a DIN-rail.
Wall installations: Attach the brackets on
the unit using the included screws and
then mount on a wall.
Identify a power source within 6 feet (1.8
meters).
Choose a dry area with ambient
temperature between -40 and 75ºC (-40
and 167ºF).
Keep away from heat sources, sunlight,
warm air exhausts, hot-air vents, and
heaters.
Make sure there is adequate airflow.
4 Connect to the Ports
The EX41941 has the following ports:
4 10/100/1000 Mbps PoE ports
1 10/100/1000 Mbps RJ-45 uplink port
10/100/1000BASE-T Ports
Ports 1 to 4 are gigabit copper ports that are
compliant with IEEE 802.3af/at PoE protocol,
with up to 30W power output per port. Port 5
is a gigabit copper port that can be utilized
for data uplink.
5 Connect Power
Terminal Block
Connect the unit to a suitable power supply
using appropriate wire, 18-24 AWG, rated for
105°C or higher.
Redundant power is supported. However,
only one power input is required to operate
the unit.
1. Connect power wires to the
appropriate V1+/- or V2+/- pins on
the terminal block.
2. Connect the grounding wire to the
ground screw.
3. Plug the terminal block into the
socket.
+V1- +V2-
Copyright 2022 EtherWAN Systems, Inc. Page 2
All Rights Reserved
EX41941
8/2/2022
EX419 41 Hardened PoE Switch
Installation Guide
6 Front Panel LEDs
LED Panel Layout
LED Color Status
Power
1/2
Green ON = power detected
OFF = power not detected
PoE
(1-4)
Amber ON = PD is detected
Off = No PD detected
Link/ACT
Green ON = Connection
established
Off = Link not detected
Flashing = Port is sending
or receiving data
TX
(5)
G reen
ON = Connection
established
Off = Link not detected
Flashing = Port is sending
or receiving data
7 Notes
Produktspezifikationen
| Marke: | EtherWAN |
| Kategorie: | Netzwerkkarte / Adapter |
| Modell: | EX41941F |
Brauchst du Hilfe?
Wenn Sie Hilfe mit EtherWAN EX41941F benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Netzwerkkarte / Adapter EtherWAN
21 Juni 2025
20 Juni 2025
20 Juni 2025
Bedienungsanleitung Netzwerkkarte / Adapter
- Targus
- Yamaha
- AEG
- Hawking Technologies
- Intel
- Hercules
- B&B Electronics
- Black Box
- AirLive
- Russound
- Renkforce
- Heckler Design
- Tripp Lite
- Vivanco
- Iiyama
Neueste Bedienungsanleitung für -Kategorien-
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025