EtherWAN EX75000 Bedienungsanleitung

Lies die bedienungsanleitung für EtherWAN EX75000 (2 Seiten) kostenlos online; sie gehört zur Kategorie Schalter. Dieses Handbuch wurde von 19 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 4 Bewertungen. Hast du eine Frage zu EtherWAN EX75000 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Copyright

©

2014 EtherWAN Systems, Inc. Page 1

All Rights Reserved

EX75000 rev. 1.0

12/2/2014

1 Unpacking

Unpack the items. Your package should include:

One EX75000 Series hardened managed

switch

Rack-mounting hardware brackets

One CD containing this user’s guide

If items are missing or damaged, notify your

EtherWAN representative. Keep the cartonand

packing material.

2 What Else You Need

Appropriate cables for dataports

Personal computeror laptop

3 Selecta Location

Desktop installations: Mount ona flat table

or shelf surface.

Rack installations: Use a 19-inch (48.3-

centimeter) EIA standard equipment rack

that is grounded and physically secure.

Identifya power source within 6 feet (1.8

meters).

Choose a dry area with ambient temperature

between -40 and 75ºC (-40 and 167ºF).

Keep away from heat sources, sunlight, warm

air exhausts, hot-air vents, and heaters.

Be sure there is adequate airflow.

Keep the switch at least 6 ft.(1.83 m) away

from the nearest source of electromagnetic

noise, such as a photocopy machine.

4 Connect to the DataPorts

Your switch has the following ports:

24 10/100Base-TX Power over Ethernet (PoE)

ports

4 Gigabit ports

10/100Base-TXPoEPorts

Theswitch has 24 10/100Base-TX Power over

Ethernet (PoE) portsthatconform to IEEE802.3at

and provide up to 30W per port, with a total

power budget of 420W.

Theseports can connect todevices such as an IP

surveillance camera or a Voice Over Internet

Protocol (VoIP) phone.

A.Insert one end of acategory 5 or bettercable

into a switch port.

B.Connect the other end into the Ethernet port

of the device.

C.Repeat steps A and B for each additional

device you want to connect to the switch.

Gigabit Ports

This switch has 4 10/100/1000Base-TX ports,

1000Base-SX/LX/BX ports, or 1000BaseSFP ports.

You can connect these portsto network devices

such as a computer, printer, network video

recorder (NVR), network storage, or they can

connect to the network itself.

5 ApplyDC Power

The switch has a 48-57VDC terminal block:

+55VDC -55VDC

−0 -55

+ +550

Earth Ground

The switch also has a relay with thefollowing

settings:

SettingRelay Settings

Relay normalb c OPEN, c a CLOSE

Relay alarmb c CLOSE, c a OPEN

EX75000 Managed SwitchInstallation Guide

Continued on next page

Produktspezifikationen