EtherWAN PD3041 Bedienungsanleitung


Lies die bedienungsanleitung für EtherWAN PD3041 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 10 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 5.5 Bewertungen. Hast du eine Frage zu EtherWAN PD3041 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
Copyright 2016 EtherWAN Systems, Inc. Page 1
All Rights Reserved
PD3041 rev. 4.2
7/10/2016
W70G-PD3041XQ3
Introduction
This hardened surge protection device protects
DSL phone line applications from dangerous
electrical surges. Designed for harsh
environments, the PD3041 can be installed in
almost any location to protect valuable network
equipment. Protection is of signal pairs is
achieved through RJ-11 connector or terminal
block.
Connections
NOTE: Use either RJ11 or terminal block
connector. Do not use both at the same time.
Grounding
For DIN rail installation, the ground is via the DIN
rail rack.
For other installations, an extra grounding point
is available via the screw and grounding wire.
PD3041 Hardened Surge Protection Device
Quick Start Guide
RJ11 or Terminal Block: Output
door connection to indoor or inside
cabinet
Top View Output
RJ11 or Terminal Block: Input door
connection from outdoor or outside
cabinet
Bottom View Input


Produktspezifikationen

Marke: EtherWAN
Kategorie: Nicht kategorisiert
Modell: PD3041

Brauchst du Hilfe?

Wenn Sie Hilfe mit EtherWAN PD3041 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten