Eureka Copper Canyon 12 Bedienungsanleitung

Lies die bedienungsanleitung für Eureka Copper Canyon 12 (24 Seiten) kostenlos online; sie gehört zur Kategorie Zelt. Dieses Handbuch wurde von 41 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 21 Bewertungen. Hast du eine Frage zu Eureka Copper Canyon 12 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Component List: 1 Tent Body, 6 Wall Poles, 3 Roof Poles, 1 Fly Rod

1 Fly with Guy Ropes, 1 Carry Bag, 1 Stake Bag/Stakes, 1 Pole Bag

This is a large tent;

Set-up is both faster

and easier with two

people.

Spread the tent out with the top side up. Assemble the roof poles and slide the black poles

into black trimmed sleeves diagonally across the roof. Then slide the gray roof pole into

the gray trimmed sleeve

and over the black poles.

Assembly Instructions for

Copper Canyon 12

rev. A 6.2011

Center Wall poles

Fly rod

Corner Wall poles

Roof poles

Insert the gray pole

into the ribbed

section of the

mid elbows.Insert the black poles into the corner elbows.

Raise one side of the roof and

insert the wall poles into the

bottom of the elbows.

Insert the pin from the

web/rings into the

bottom ferrules.

Raise the other side and the center to make a freestanding structure.

Dress out the tent as

you stake the web

loops down.

Attach the J-hooks to the

nylon

rings on the webs.

At the corners, reach under the fly and wrap the

hook & loop straps around the wall poles.

Then wrap the center poles.

Lastly, this a tall, straight sided tent; it is important

that you stake out the guylines at each elbow.

YOUR TENT IS READY !

Clip the tent to the wall poles.

Lay out the fly with the bottom

side up. Assemble and slide the

fly rod into the pockets.

Then wrap the hook & loop tabs

around the rod.

Turn the fly over and drape

it across the tent so that

the yellow webs meet.

Pull the fabric out and over

the corner elbows.

Produktspezifikationen