Eureka Tetragon 1210 Bedienungsanleitung

Lies die bedienungsanleitung für Eureka Tetragon 1210 (4 Seiten) kostenlos online; sie gehört zur Kategorie Zelt. Dieses Handbuch wurde von 28 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 14.5 Bewertungen. Hast du eine Frage zu Eureka Tetragon 1210 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Component List:

1 Tent 2 Tent Poles 1 Carry Bag

1 Stake Bag W/Stakes 1 Rain Fly

4 Brim Rods 1 Pole Bag 6 Pull Out Cords

1 Sewn-In Gear Loft 1 Divider

NOTE:

•

houghAlt it is possible to pitch this tent alone, it

is fstend easie wit two people.ar arh

• Do rnot d op tent bg or pole bag on its ed. Doa n

not bouce tentn bag on its eto get the tent out. nd

Th maese actionsy cthe shock-cord and/orut

da the n.magepole eds

• Ttehe nt clip webbing is now color coded for

eveeasieset-up.st slide on r June pole throgh oneu

color.

1. Unroll and unfold the tent on the ground. Separate

the rest of the components and place to one side.

Open the door before pitching the tent. Do not stake

the tent down (however, in windy conditions, stake

down one corner that faces into the wind).

2. Assemble both of the shock-corded tent poles.

Keep the pole sections from snapping together, as

this can damage the ends.

Note: Make certain each plain end has been

properly seated into the metal ferrule.

3. Insert the assembled pole through both sleeves

from to . Insert the second pole through the A B

sleeves from to , forming an X across the tent. C D

See Fig.1

4. At , insert the tent corner pin into the end of the tent pole ferrule. A

At , grasp the tent corner pin in one hand, the tent pole in the other. B

Arch the pole to raise the tent and place the pin into the end of the

pole. Repeat this with the second pole from to . C D

See Fig.2 and 3.

5. Start at the bottom and attach all the clips to

the poles to create a freestanding tent. Place it in

the desired location. See Fig.4 and 5.

6.. Stake the tent down through the corner

rings. Stake the opposite corners while

applying tension to smooth the floor wrinkles.

See fig 6.

Important: In strong winds, tie extra guy out

cords (not provided) to the storm loops on

the fly. Stake these out securely.

ASSEMBLY

INSTRUCTIONS

FOR THE

TETRAGON 1210

REV.E 4-09

A

A

B

B

D

D

C

C

7. Drape the fly over the tent

so that the brim rod sleeves

are above the doors and

windows and the vestibule is

over the front door. Slide the

brim rods into the sleeves.

See fig 7.

10. Reach under the fly and insert the brim rod

tips into web grommets to tension the rod and

create an arch over the door. Repeat over the

remaining door and windows. See fig 10.

11. Pull out and stake down the two front loops

of the fly vestibule. See fig 11.

8. Reach under the fly

and wrap the hook and

loop straps around the

poles to secure the fly

to the tent frame.

See fig 8.

9. Fasten the shock

corded J-hook, at each

of the corners of the

fly, to the stake out

rings on corners of the

tent. See fig 9.

Your tent is now ready for use.

fig 1

fig 3

fig 4

fig 6

fig 2

fig 7

fig 8

fig 9

fig 10

fig 11

fig 5

Produktspezifikationen