EverFocus EMW330 Bedienungsanleitung

Lies die bedienungsanleitung für EverFocus EMW330 (10 Seiten) kostenlos online; sie gehört zur Kategorie Überwachungskamera. Dieses Handbuch wurde von 28 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 8 Bewertungen. Hast du eine Frage zu EverFocus EMW330 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Mobile IR Wedge Camera

Operation Instructions

Model No.

EMW330/EMW330T

Please read this manual first for correct installation and operation. This manual should be retained for future

reference. The information in this manual was current when published. The manufacturer reserves the right

to revise and improve its products. All specifications are therefore subject to change without notice.

PRECAUTIONS

1. Do not install the camera near electric or magnetic fields.

Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio

speakers since the electromagnetic fields generated from these devices may distort the video image.

2. Never disassemble the camera beyond the recommendations in this manual nor introduce

materials other than those recommended herein.

Improper disassembly or introduction of corrosive materials may result in equipment failure or other

damage.

3. Try and avoid facing the camera toward the sun.

In some circumstances, direct sunlight may cause permanent damage to the sensor and/or internal

circuits.

4. Keep the power cord away from water and other liquids and never touch the power cord with

wet hands.

Touching a wet power cord with thehands or touching the power cord with wet hands may result in

electric shock.

5. Never install the camera in areas exposed to water, oil or gas.

Water, oil or gas may result in equipment failure, electric shock or, in extreme cases, fire.

6. Cleaning

Use a damp soft cloth to remove any dirt from the camera body. Use lens tissue or a cotton tipped

applicator and ethanol to clean the camera lens. Please do not use complex solvents, corrosive or

abrasive agents for cleaning.

7. Do not operate the camera beyond the specified temperature, humidity or power source ratings.

Use the camera at temperatures within -40℃ ~ 60℃(-40℉~15.5℉)and humidity between

20~80%. The input power source is

12VDC.

Produktspezifikationen