Exo-Terra PT2479 Bedienungsanleitung
Seiten 4 Nicht kategorisiert
Lies die Bedienungsanleitung für Exo-Terra PT2479 kostenlos online oder lade das PDF herunter. Diese Anleitung wurde 0 Mal aufgerufen. Frage zu diesem Modell? Stelle eine Frage

OPERATING INSTRUCTIONS
MODE D’EMPLOI
GEBRAUCHSANLEITUNG
MANUAL DE INSTRUCCIONES
MODALITÀ D’USO
GEBRUIKSAANWIJZING
MONSOON NANO
PT2479
PROGRAMMABLE MISTING SYSTEM
SYSTÈME PROGRAMMABLE
DE BRUMISATION
PROGRAMMIERBARES
BEREGNUNGSSYSTEM
SISTEMA DE LLUVIA PROGRAMABLE
SISTEMA DI NEBULIZZAZIONE
PROGRAMMABILE
PROGRAMMEERBAAR NEVELSYSTEEM
INDEX
ENGLISH 3
FRANÇAIS 10
DEUTSCH 18
ESPAÑOL 26
ITALIANO 34
NEDERLANDS 42
PT2479
MONSOON NANO
PROGRAMMABLE MISTING SYSTEM
Thank you for purchasing the Exo Terra
®
Monsoon NANO. Please
read this operation manual carefully before use and operate
according to the instructions provided for maximum safety and
performance. We recommend that you keep this manual handy for
future reference.
• Programmable misting unit for terrariums and greenhouses
• Easy to connect and install
• Strong 2 BAR / 29 PSI / 200 KPA water pressure pump
• Multi-directional brass spray nozzles for ultrafine misting (x2)
• Pressure resistant Polyether tubing
• Can be used with any water reservoir
The Exo Terra
®
Monsoon NANO comes with 2 easy-to-install,
multi-directional brass spray nozzles, making it ideal for 1 up to 2
terrariums. The Monsoon NANO can be extended to accommodate
up to 4 nozzles. The mist produced by these specially designed
brass nozzles is extremely fine, creating a fog-like effect in your
terrarium or greenhouse.
OPERATING INSTRUCTIONS
• Maximum Water Pressure: 2 BAR / 29 PSI / 200 KPA
• Maximum Flow Rate: 48 L/h / 12 G/h
• Wattage: 5.6W
• Dimensions: 9 × 9 × 5 cm / 3.5” × 3.5” × 2”
Read instructions thoroughly prior to installation and operation
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
To guard against injury, basic precautions should be observed,
including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
and all the
important notices on the product before using. Failure to do so may
result in personal injury or damage to the product.
DANGER
– To avoid possible electrical shock, special care should
be taken since water is/may be employed in the use of this product.
For each of the following situations, do not attempt repairs yourself,
return the product to an authorized service facility for service if it is
still under warranty or discard the product:
1. Do not operate the appliance if it has a damaged electrical cord
or power adaptor, or if it is malfunctioning or if it is dropped or
damaged in any manner.
2. The supply cord from the transformer supplied with this unit is
detachable and must be replaced along with the power adaptor if
damaged.
MONSOON NANO
Operating
Instructions
ENGLISHFRANÇAISDEUTSCHESPAÑOLITALIANONEDERLANDS
3. The appliance is only to be used with the power supply unit
provided with the appliance.
4. The appliance must only be supplied with safety low voltage,
corresponding to the marking on the appliance.
5. To avoid the possibility of the appliance plug or electrical socket
getting wet, position the unit to one side of a wall-mounted
socket to prevent water from dripping onto the socket or plug.
A “drip-loop” should be arranged. The “drip loop” is that part
of the cord below the level of the socket, or the connector if an
extension cord is used, to prevent water from traveling along
the cord and coming into contact with the socket. If the plug or
socket does get wet,
DO NOT
unplug the cord. Disconnect the
fuse or circuit breaker that supplies power to the appliance.
Then unplug and examine for the presence of water in the socket.
6.
CAUTION
– Always unplug or disconnect the appliance from the
outlet before putting on or taking off parts and while the equipment
is being installed, maintained or handled. Never yank the cord to pull
the power adaptor from the outlet. Grasp the power adaptor body
and pull to disconnect. Always unplug an appliance from an outlet
when not in use. Never lift this product by the supply cord.
7. This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance shall not be
made by children without supervision.
8. Do not use this appliance for other than its intended use. The
use of attachments not recommended or sold by the appliance
manufacturer may cause an unsafe condition.
9. Do not install or store the appliance where it will be exposed
to temperatures below freezing. Do not expose the unit to direct
sunlight.
10. Ensure that the appliance is placed on a flat, even surface.
Monitor the product regularly. Do not leave the product unattended
for extended periods.
11. If an extension cord is necessary, ensure the connection is
watertight and dust proof. A cord with a proper rating should be
used. A cord rated for less amperes or watts than the appliance
rating may overheat. Care should be taken to arrange the cord so
that it will not be tripped over or pulled. The connection should be
carried out by a qualified electrical installer.
12. For
INDOOR HOUSEHOLD USE ONLY, NOT
for commercial use.
13. – To prevent corrosion or deterioration of materials that
CAUTION
could lead to electric shock, use only with fresh water.
14. Do not add any chemicals or medicinal compounds to the water
used in this device.
15.
IMPORTANT
– Pump must not be allowed to run dry.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Only the faithful observation of these installation, electrical and
maintenance guidelines will ensure the safe and efficient use of
this appliance.
ATTENTION: Only use de-mineralized/distilled water or debris-free
and clean rainwater!
ENGLISHFRANÇAISDEUTSCHESPAÑOLITALIANONEDERLANDS
INSTALLATION – Exo Terra Natural Terrariums
Follow this installation procedure to install the Exo Terra
®
Monsoon
NANO system on any size of Exo Terra
®
Natural Terrarium. The
system comes with 2 easy-to-install nozzles, which should be
mounted on either of the terrarium’s glass side panels, as close as
possible to the opening front doors.
1. Unlock the top screen cover and lift it off the terrarium.
2. Slide the inlet holes (located on the back of the screen top on
either side) to the open position, so the tubing will fit through.
3. Feed the tubing through the first inlet hole on each side on the
back of the terrarium. (fig. A)
4. Position the nozzle on the glass portion of the terrarium’s side
panels with the suction cup, or use the Monsoon Nozzle mounting
points if these are available in your terrarium. When using the
suction cups, please make sure that the glass area is clean and free
of any dirt or deposits before mounting the nozzles.
5. For optimal spray performance, position the nozzle as close as
possible to the front opening windows and the top screen (fig. B).
Direct the nozzle position toward the middle of the terrarium to
prevent the spray from reaching the front and side glass panels
during operation. This ensures the most effective and precise
application of the spray water. This ensures the spray water is spray
water is optimally distributed.
6. Replace the top screen cover and lock it back into position.
7. Close the remaining inlets by sliding the slider against the tubing
or wires to prevent escape from feeding insects and smaller animals.
(fig. C)
8. Remove any slack in the tubing inside the terrarium. Make sure
there are no kinks in the tubing that could impede water flow to
the nozzles.
9. Connect the tubing to the OUT-spout on the side of the unit by
pressing the tubing firmly onto the OUT-spout. (fig. D)
10. Connect the inlet tubing to the IN-spout and lead the inlet tubing
to the designated water reservoir and position the water filter inside
a reservoir of your choice (fig. E).
11. Make sure the unit is in its final operating location, on a solid,
level surface.
12. Fill the reservoir with de-mineralized/distilled water up to a
maximum of 2,5 cm (1”) from the top. (Using regular tap water will
cause clogging of the nozzles by mineral deposits!)
13. Connect the USB-C connector to the side of the unit, and the
USB-A connector to the power adaptor.
14. Plug the power adaptor into the wall socket, and your Exo Terra®
Monsoon Programmable Misting system is now ready to use.
Suspension system using the self-adhesive clips
1. Determine where you want the Monsoon NANO to be positioned
on the terrarium or other surface of your choice.
2. Remove the protective backing from the male-part of the clip
and carefully fit the Self-adhesive Clip on the back of your Monsoon
NANO. Make sure the tape is pressed evenly for at least 30 seconds.
Please make sure to adhere the Self-adhesive male-part in the
correct position, so your Monsoon NANO will reside in the correct
horizontal position with readible display.
3. Clean the surface of the terrarium glass or other surface with a
clean cloth or paper towel.
4. Remove the protective backing from the female-part of the clip
and carefully fit the Self-adhesive Clip on the terrarium glass or other
surface of your choice. Make sure the tape is pressed evenly for at
least 30 seconds. Please make sure to adhere the Self-adhesive
female-part in the correct position, so your Monsoon NANO will
reside in the correct horizontal position with readible display.
5. Clip the male part in the female part to suspend the Monsoon
NANO.
SETTING - adjusting Spray Interval and Duration
To manually start the spraying process, or to test if the spray heads
are set to a fine mist, you can briefly press the “Settings” button so
the display lights up, then long press and hold the “Settings” button
until the Monsoon NANO starts spraying. The Multi-directional Brass
Nozzles can be adjusted by turning the front part of the nozzle head
clockwise against the rear part, this will adjust the spray water from
a jet to a fine mist. Do not turn the nozzle head too far clockwise, this
will close the nozzle and stop the spray. To stop the manual spraying
process, briefly press the “Settings” button again.
The standard setting of the Monsoon NANO is as following:
Spray Interval every 12 hours with a Spray Duration of 10 seconds,
meaning, the Monsoon NANO will spray twice a day for 10 seconds.
To review the current configuration, just press the “Settings” button,
prompting the LCD screen to illuminate and display the current
setting.
To adjust this setting to cater to the specific requirements of your
animals or plants, simply press the “Settings” button again, and the
“Seconds” or “Minutes” indication will start flashing.
If the “Seconds” indication is flashing you can increase or decrease
the Spray Duration by simply clicking the “+” (plus) or “-” (minus)
button. Every click on the button will increase or decrease the Spray
Duration by 1 second, but if you press-and-hold the “+” or “-”
button, the value will begin to increase or decrease progressively.
You can increase the Spray Duration up to 59 seconds, once above
59 seconds, the Spray Duration will switch automatically to the
“Minutes” indication.
If the “Minutes” indication is flashing you can increase or decrease
the Spray Duration by simply clicking the “+” (plus) or “-” (minus)
button. Every click on the button will increase or decrease the Spray
Duration by 1 minute, but if you press-and-hold the “+” or “-”
button, the value will begin to increase or decrease progressively.
You can increase the Spray Duration up to 9 minutes, once above
9 minutes, the Spray Duration will switch automatically back to the
“Seconds” indication.
By pressing the “Settings” button, the “Seconds” or “Minutes”
setting is stored and the Spray Interval “Hours” or “Days” indication
will start flashing.
If the “Hours” indication is flashing you can increase or decrease the
Spray Interval by simply clicking the “+” (plus) or “-” (minus) button.
Every click on the button will increase or decrease the Spray Interval
by 1 hour, but if you press-and-hold the “+” or “-” button, the value
will begin to increase or decrease progressively. You can increase
the Spray Interval up to 23 hours, once above 23 hours, the Spray
Interval will switch automatically to the “Days” indication.
If the “Days” indication is flashing you can increase or decrease the
Spray Interval by simply clicking the “+” (plus) or “-” (minus) button.
Every click on the button will increase or decrease the Spray Interval
by 1 Day, but if you press-and-hold the “+” or “-” button, the value
will begin to increase or decrease progressively. You can increase
the Spray Interval up to 30 days, once above 30 days, the Spray
Interval will switch automatically back to the “Hours” indication.
NOTE: When the reservoir is nearly empty, it is advisable to refill the
reservoir immediately or to switch off the unit. Although the pump
can run idle without overheating once the reservoir is empty, it is still
advised to refill the reservoir as soon as possible or disconnect the
Monsoon NANO from the power source to ensure a longer pump life.
NOTE: The Exo Terra
®
Monsoon NANO should be set according to the
needs of the animals and the size of the terrarium. Be careful not
to operate the unit too frequently or too long to avoid overflowing
the terrarium! The unit should be set so that water added to the
terrarium from the first operating cycle is allowed to evaporate
before the next operating cycle begins, or at least make sure that the
excess water can be drained out of the terrarium.
Adding additional Nozzles to the system
The Exo Terra
®
Monsoon NANO can be operated with up to 4
nozzles. Please note that every additional nozzle will result in less
performance from each nozzle installed. To connect additional
nozzles, an extra nozzle and a Y-connector (PT2498) are needed
(sold separately). Simply cut the tubing where convenient. Make sure
the nozzle can easily be mounted in its intended location without
stretching the tubing. Connect the tubing coming from the unit to the
single inlet of the Y-connector and the other end of the tubing to the
double inlets. Connect the tubing from the additional nozzle to the
other inlet of the Y-connector. Please note that additional nozzles can
be mounted in multiple terrariums.
MAINTENANCE
Only use de-mineralized/distilled water or debris-free and clean
rainwater! Wash or replace the filter regularly, at least every six
months depending on the usage and water quality. To wash the
water filter, open the water filter cartridge and remove the filter
sponge. Thoroughly rinse the filter sponge and replace it in the
cartridge. If the nozzles are clogged or if they spray irregularly,
place the nozzles overnight in a 50/50 water/vinegar solution. Rinse
thoroughly with clean water before mounting the nozzles back
onto the terrarium. A replacement filter and other accessories are
available at your local Exo Terra
®
pet retailer.
GUARANTEE
This product is guaranteed for defective parts and workmanship
for a period of 2 years from the date of purchase. This guarantee is
valid with proof of purchase only. The guarantee is limited to repair
or replacement only and does not cover consequential loss, loss or
damage to livestock and personal property or damage to animate or
inanimate objects, irrespective of the cause thereof. This guarantee
is valid only under normal operating conditions for which the unit
is intended. It excludes any damage caused by unreasonable use,
negligence, improper installation, tampering, abuse or commercial
ENGLISHFRANÇAISDEUTSCHESPAÑOLITALIANONEDERLANDS
use. The warranty does not cover wear and tear, breakage of glass or
parts which have not been adequately or correctly maintained.
THIS
DOES NOT AFFECT YOUR STATUTORY RIGHTS.
RECYCLING
This item bears the selective sorting symbol for waste
electronic and electrical equipment (WEEE). This means
that the product must be handled pursuant to European
Directive 2012/19/EU in order to be recycled or dismantled
to minimize its impact on the environment. For further
information please contact your local or regional Authorities.
Electronic products not included in the selective sorting process are
potentially dangerous for the environment and human health due to
the presence of hazardous substances.
SERVICE
If you have any problem or question about the operation of this
product, please consult your Exo Terra® specialist retailer in the first
instance. Most problems can be resolved in store, but in the unlikely
event it cannot, please return the unit with a valid proof of purchase
to the retailer for a replacement under the two year warranty. When
you call (e-mail or write) our Customer Service Department, please
have all relevant information such as model number and/or part
numbers available, as well as the nature of the problem:
Customer Service and Authorized Warranty Repair Service:
U.K.:
Rolf C. Hagen (UK) Ltd.
California Dr. Whitwood Industrial Estate
Castleford, West Yorkshire WF10 5QH
mail to: https://exo-terra.com/need-help/customer-service/support-
uk-en/
Helpline Number 01977 521015. Between 9:00 AM and 5:00 PM,
Monday to Thursday and 9:00 AM and 4:00 PM on Friday (excluding
Bank Holidays).
Germany:
HAGEN Deutschland GmbH & Co. KG, Lehmweg 99-105, 25488 Holm
Service-Hotline: +49 (0) 4103 / 960-2000
Montag – Freitag von 9:00 – 16:00 Uhr
mail to: https://exo-terra.com/need-help/customer-service/support-
ge-de/
Spain:
Rolf C Hagen España, S.A., P.I. L’Alteró, 46460 Silla (Valencia)
mail to: [email protected]
Malaysia:
Rolf C.Hagen (Sea) Sdn.Bhd.
Lot 14A, Jalan 3A, Kawasan Perusahaan
Cheras Jaya, Balakong 43200 Cheras, Selangor Darul Ehsan.
Tel: 603-9074 2388
Fax: 603-9074 2389
mail to: customer[email protected]
ENGLISHFRANÇAISDEUTSCHESPAÑOLITALIANONEDERLANDS
For general information on our whole product range, explore our
websites at: www.exo-terra.com or www.hagen.com.
Distributed by:
Canada: Rolf C. Hagen Inc., Montreal, QC H9X 0A2
U.K.: Rolf C. Hagen (U.K.), W. Yorkshire WF10 5QH
Germany: HAGEN Deutschland GmbH & Co. KG, 25488 Holm
Spain: Rolf C Hagen España, S.A. P.I. L’Alteró, 46460 Silla (Valencia)
Malaysia: Rolf C. Hagen (SEA) SDN, 43200 Cheras, Selangor D.E.
Made in China
Merci d’avoir acheté Système programmable de brumisation Exo
Terra
®
pour terrariums. Veuillez lire le présent mode d’emploi
attentivement avant d’utiliser cet appareil et suivre les instructions
fournies pour éviter tout danger et assurer un fonctionnement optimal.
Nous vous recommandons de conserver ce mode d’emploi pour
consultation ultérieure.
• Système programmable de brumisation pour terrariums et
serres
• Raccordement et installation faciles
• Pompe hydraulique puissante avec pression de 2 bar / 29 psi
/ 200 kPa
• Deux becs pulvérisateurs multidirectionnels en laiton pour une
brume ultrafine
• Tuyaux de polyéther résistants à la pression
• Utilisation avec n’importe quel réservoir d’eau
Le système programmable de brumisation Monsoon NANO Exo Terra
est équipé de deux becs pulvérisateurs en laiton faciles à installer,
mais peut contenir jusqu’à 4 becs pulvérisateurs, le rendant idéal pour
une utilisation avec un terrarium et jusqu’à deux terrariums. La brume
produite par les becs pulvérisateurs en laiton spécialement conçus
est extrêmement fine, créant un effet de brouillard dans le terrarium
ou la serre.
INSTRUCTIONS D’UTILISATION
• Pression maximale de l’eau : 2 bar / 29 psi / 200 kPa
• Débit maximal de l’eau : 48 L/h (12 gal US/h)
• Puissance : 5,6 W
• Dimensions : 9 x 9 x 5 cm (3,5 x 3,5 x 2 po)
Lire complètement le mode d’emploi avant l’installation et
l’utilisation
INSTRUCTIONS CONCERNANT LES RISQUES D’INCENDIE, DE CHOC
ÉLECTRIQUE ET DE BLESSURES À DES PERSONNES
MESURES DE SÉCURITÉ IMPORTANTES
ATTENTION :
Pour éviter toute blessure, il faut observer des précautions
élémentaires de sécurité, notamment celles qui suivent :
LIRE ET RESPECTER TOUTES LES MESURES DE SÉCURITÉ
et tous
les avis importants apparaissant sur l’appareil avant de l’utiliser. Tout
manquement à ces précautions peut entraîner des blessures aux
personnes ou des dommages à l’appareil.
MISE EN GARDE
- Pour éviter tout risque de choc électrique, faire
Monsoon NANO
Instructions d’utilisation
preuve de la plus grande prudence puisque l’eau est utilisée ou peut
l’être avec cet appareil. Dans chacune des situations suivantes, ne
pas essayer de réparer l’appareil soi-même; le retourner plutôt à
un service de réparations autorisé s’il est encore sous garantie ou
le jeter.
1. Ne pas utiliser un appareil dont la fiche ou l’adaptateur de courant
est endommagé, qui ne fonctionne pas correctement ou qui est tombé
ou a été endommagé de quelque façon que ce soit.
2. Le cordon d’alimentation du transformateur fourni avec cet appareil
est détachable et doit être remplacé, de même que l’adaptateur, s’il
est endommagé.
3. Seul le bloc d’alimentation fourni doit être utilisé avec cet appareil.
4. L’appareil ne doit fonctionner qu’à une très basse tension sûre
comme l’indique l’étiquette sur l’appareil.
5. Pour éviter toute possibilité que la fiche des appareils soit mouillée,
placer l’appareil à côté d’une prise de courant murale afin
d’empêcher l’eau de s’écouler dans la prise. Il faut former une
« boucle d’égouttement ». La « boucle d’égouttement » est la
partie courbée du cordon se trouvant sous la prise de courant
ou le raccord, si une rallonge est utilisée, afin d’éviter que l’eau
s’écoule le long du cordon et entre en contact avec la prise de
courant. Si la fiche ou la prise de courant sont mouillées,
NE PAS
débrancher l’appareil. Mettre d’abord hors circuit le fusible ou le
disjoncteur qui fournit l’électricité à l’appareil, le débrancher ensuite
et vérifier qu’il n’y a pas d’eau dans la prise.
6.
ATTENTION
- Toujours débrancher l’appareil de l’alimentation
électrique avant d’insérer ou de retirer des pièces et pendant
l’installation, l’entretien ou la manipulation de l’équipement. Ne jamais
tirer sur le cordon d’alimentation pour débrancher l’adaptateur de
courant de la prise. Prendre plutôt l’adaptateur de courant entre les
doigts, puis tirer pour le débrancher. Toujours débrancher l’appareil
d’une prise de courant quand il n’est pas utilisé. Ne jamais soulever
cet appareil par le cordon d’alimentation.
7. Cet appareil peut être utilisé par des enfants de 8 ans et plus
ainsi que par des personnes aux capacités physiques, sensorielles
ou mentales réduites, ou qui manquent d’expérience et de
connaissances, si elles sont sous la surveillance d’une personne
responsable de leur sécurité ou qu’elles ont reçu les directives
nécessaires à l’utilisation de cet équipement. Les enfants ne doivent
pas jouer avec cet appareil. Le nettoyage et l’entretien ne doivent pas
être effectués par les enfants sans surveillance.
8. Ne pas se servir de l’appareil pour un usage autre que celui prévu.
L’emploi d’accessoires ni recommandés ni vendus par le fabricant de
l’appareil peut être source de situations dangereuses.
9. Ne pas installer ni ranger l’appareil où il risque d’être exposé à des
températures sous le point de congélation. Ne pas exposer l’appareil à
la lumière directe du soleil.
10. S’assurer que l’appareil est placé sur une surface plane et de
niveau. L’examiner régulièrement. Ne pas laisser l’appareil sans
surveillance pendant des périodes prolongées.
11. Si une rallonge électrique est nécessaire, s’assurer que la
connexion est étanche et à l’abri de la poussière. Vérifier qu’elle est
d’un calibre suffisant. Un cordon électrique de moins d’ampères ou
de watts que l’appareil peut surchauffer. Des précautions devraient
être prises afin d’éviter que la rallonge soit tirée ou qu’on trébuche
sur celle-ci. Tout travail électrique doit être effectué par un électricien
qualifié.
12. Pour
USAGE DOMESTIQUE ET À L’INTÉRIEUR SEULEMENT
. Ne doit
PAS
servir à un usage commercial.
13.
ATTENTION
- Afin de prévenir la corrosion ou la détérioration de
ENGLISHFRANÇAISDEUTSCHESPAÑOLITALIANONEDERLANDS
matériaux pouvant causer un choc électrique, utiliser seulement de
l’eau douce avec cet appareil.
14. Ne pas ajouter de produits chimiques ni de composés médicinaux
à l’eau utilisée dans cet appareil.
15. IMPORTANT - La pompe ne doit pas fonctionner à sec.
CONSERVER CES INSTRUCTIONS POUR CONSULTATION
ULTÉRIEURE.
Seule l’observation rigoureuse des présentes directives
concernant l’installation, l’électricité et l’entretien assurera un
emploi sûr et efficace de cet appareil.
ATTENTION : Utiliser seulement de l’eau déminéralisée/distillée ou
de l’eau de pluie exempte de débris et propre.
INSTALLATION - Terrariums naturels Exo Terra
Suivre la procédure d’installation du système Monsoon NANO Exo
Terra sur n’importe quel format de terrarium naturel Exo Terra. Le
système est équipé de deux becs pulvérisateurs qui doivent être
installés sur les parois latérales en verre du terrarium, le plus près
possible des portes avant.
1. Déverrouiller le couvercle grillagé et le soulever du terrarium.
2. Dégager les ouvertures pour le tuyau (situées à l’arrière du
couvercle grillagé de chaque côté) afin d’y insérer celui-ci.
3. Insérer le tuyau dans la première ouverture de chaque côté à
l’arrière du terrarium (fig. A).
4. Installer les becs pulvérisateurs sur le verre des parois latérales
du terrarium à l’aide des ventouses, ou utiliser les points de fixation
intégrés pour les becs pulvérisateurs Monsoon si le terrarium en
est muni. Vérifier que le verre est propre et exempt de saleté ou de
dépôts avant d’installer les becs pulvérisateurs munis de ventouses.
5. Pour des résultats optimaux de brumisation, installer les becs
pulvérisateurs le plus près possible des portes avant et du couvercle
grillagé (fig. B). Positionner les becs au milieu du terrarium pour
éviter que le jet de brouillard vaporise les parois avant et latérales
lorsque l’appareil fonctionne. Ceci assure une application des plus
sûres et précises de l’eau vaporisée et la distribution uniforme de
cette dernière.
6. Replacer le couvercle grillagé et le verrouiller en place.
7. Bloquer les ouvertures restantes en glissant le curseur sur les
tuyaux ou les fils pour empêcher les insectes de nourrissage ou les
très petits animaux de s’enfuir (fig. C).
8. Éliminer le relâchement des tuyaux à l’intérieur du terrarium.
Vérifier que les tuyaux ne sont pas entortillés, ce qui empêcherait le
débit d’eau d’atteindre les becs pulvérisateurs.
9. Raccorder le tuyau au bec de sortie sur le côté de l’appareil en y
insérant fermement le tuyau (fig. D).
10. Raccorder le tuyau d’entrée d’eau au bec d’entrée et au
réservoir d’eau dédié, puis positionner le filtre à eau dans le
réservoir de votre choix.
11. S’assurer que l’appareil est placé sur une surface solide et de
niveau, à l’endroit final où il fonctionnera.
12. Remplir le réservoir d’eau déminéralisée/distillée jusqu’à
un maximum de 2,5 cm (1 po) du bord supérieur. L’utilisation
d’eau ordinaire du robinet peut provoquer le blocage des becs
pulvérisateurs en raison des dépôts minéraux (fig. E).
13. Brancher le connecteur USB-C sur le côté de l’appareil, et le
connecteur USB-A à l’adaptateur de courant.
14. Brancher l’adaptateur dans la prise murale et le système
说明书PRO_PT2479_EU_Monsoon_Nano_20240624 52P 拼.ai 2024-07-05 拼版:420x284mm
Produktspezifikationen
| Marke: | Exo-Terra |
| Kategorie: | Nicht kategorisiert |
| Modell: | PT2479 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Exo-Terra PT2479 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten