Extech 430 Bedienungsanleitung
Extech
Multimeter
430
Lies die bedienungsanleitung für Extech 430 (16 Seiten) kostenlos online; sie gehört zur Kategorie Multimeter. Dieses Handbuch wurde von 31 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 16 Bewertungen. Hast du eine Frage zu Extech 430 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/16
User's Guide
True RMS Multimeter
Extech 430
EX430-en-GB_v5.6 4/15 2
Introduction
Congratulations on your purchase of the Extech 430 (part number EX430) True RMS Autoranging
Multimeter. This meter measures AC/DC Voltage, AC/DC Current, Resistance, Capacitance,
Frequency, Duty Cycle, Diode Test, and Continuity plus Thermocouple Temperature. Proper use and
care of this meter will provide many years of reliable service.
Safety
International Safety Symbols
This symbol, adjacent to another symbol or terminal, indicates the user must refer to the
manual for further information.
This symbol, adjacent to a terminal, indicates that, under normal use, hazardous voltages
may be present
Double insulation
This WARNING symbol indicates a potentially hazardous situation, which if not
avoided, could result in death or serious injury.
This CAUTION symbol indicates a potentially hazardous situation, which if not
avoided, may result damage to the product.
This symbol advises the user that the terminal(s) so marked must not be
connected to a circuit point at which the voltage with respect to earth ground
exceeds (in this case) 600 VAC or VDC.
WARNING
CAUTION
MAX
600V
EX430-en-GB_v5.6 4/15 3
CAUTIONS
Improper use of this meter can cause damage, shock, injury or death. Read and understand
this user manual before operating the meter.
Always remove the test leads before replacing the battery or fuses.
Inspect the condition of the test leads and the meter itself for any damage before operating the
meter. Repair or replace any damage before use.
Use great care when making measurements if the voltages are greater than 25VAC rms or
35VDC. These voltages are considered a shock hazard.
Always discharge capacitors and remove power
from the device under test before performing
Diode, Resistance or Continuity tests.
Voltage checks on electrical outlets can be di
fficult and misleading because of the uncertainty
of connection to the recessed electrical contacts. Other means should be used to ensure that
the terminals are not "live".
If the equipment is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
This device is not a toy and must not reach
children’s hands. It contains hazardous objects as
well as small parts that the children could swallow. In case a child swallows any of them,
please contact a physician immediately
Do not leave batteries and packing material
lying around unattended; they can be dangerous
for children if they use them as toys
In case the device is going to be unused for an extended period of time, remove the batteries
to prevent them from training
Expired or damaged batteries can cause cauterization on contact with the skin. Always,
therefore, use suitable hand gloves in such cases
See that the batteries are not short-circuited. Do not throw batteries into the fire.
Produktspezifikationen
| Marke: | Extech |
| Kategorie: | Multimeter |
| Modell: | 430 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Extech 430 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Multimeter Extech
19 September 2024
30 August 2024
28 August 2024
28 August 2024
28 August 2024
23 August 2024
18 August 2024
14 August 2024
14 August 2024
13 August 2024
Bedienungsanleitung Multimeter
- Monacor
- EEVBlog
- Brandson
- BENNING
- Kurth Electronic
- Amiko
- Velleman
- Brennenstuhl
- GW Instek
- CEM
- Klein Tools
- Somogyi
- Hager
- Uni-T
- Noyafa
Neueste Bedienungsanleitung für -Kategorien-
9 Juni 2025
8 Juni 2025
8 Juni 2025
7 Juni 2025
4 Juni 2025
31 Mai 2025
31 Mai 2025
30 Mai 2025
3 Dezember 2024
2 Dezember 2024