Extech FL700 Bedienungsanleitung
Extech
Multimeter
FL700
Lies die bedienungsanleitung für Extech FL700 (8 Seiten) kostenlos online; sie gehört zur Kategorie Multimeter. Dieses Handbuch wurde von 10 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 5.5 Bewertungen. Hast du eine Frage zu Extech FL700 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/8
User Manual
ExStik® FL700
Fluoride Meter
AdditionalUserManualTranslationsavailable at www.extech.com
FL700-en-GB_V1.6 12/16
2
Introduction
The model FL700 is a system specifically designed for the quick and accurate measurement of
fluoride ions in drinking water and other aqueous samples. Unlike other electrode based systems
the FL700 consists of the sensing electrode, measuring electronics, and the display in one
convenient package. This meter is shipped fully tested; with proper use, this instrument will
provide years of reliable service.
Features
Automatic temperature compensation (±10
oC of calibration temperature)
Automatic calibration
Stability sensing to optimize accuracy
Internal Datalogger for storing up to 25 readings
Direct reading of ppm, mV, or mg/l units
Automatic power off after 12 minutes to preserve battery life
Internal error detection
Four separate calibration points available (0.5, 1.0, 5.0 and 10.0ppm)
FL700-en-GB_V1.6 12/16
3
Description
Meter Description
1. Battery compartment cover
2. LCD Display
3. MODE/HOLD button
4. CAL/RECALL button
5. ON/OFF button
6. Electrode Retaining Collar (ring)
7. Electrode Sensor
(Note: The Electrode storage cap is not shown this diagram)
Electrode Sensor Description
The sensing electrode is a europium doped lanthanum fluoride single crystal
that has been incorporated into a removable sensing module that houses a
reference electrode and temperature measurement system. The high
resistance electrode signals are impedance converted to a low resistance output in the sensing
module to ensure stable and noise free performance.
Reagent Tablets
The FL700 allows the users to follow the ASTM and EPA standard methodology using any of the
TISAB reagents and standards already in use. Also, Extech has developed tablet-form TISAB which
contains all of the essential and approved chemicals that are found in the usual TISAB reagents. A
total ionic strength adjustment buffer (TISAB) is a buffer solution which increases the ionic
strength of a solution to a relatively high level.
The “dry” TISAB reagent does not contribute to sample dilution. The benefits of this method are:
1. No volumetric errors
2. Independent of sample size (± 20% of nominal sample volume)
3. Easy to use in the field or laboratory
4. Can be shipped more easily than liquid reagents
5. Lower cost per test
LCD Display
1. Bargraph display
2. Measurement units
3. Main display
4. Low (L) and High (H) Calibration icons
5. Data HOLD indicator
6. Low Battery indicator
7. Temperature display
1
2
3
4
5 7
6
Produktspezifikationen
| Marke: | Extech |
| Kategorie: | Multimeter |
| Modell: | FL700 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Extech FL700 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Multimeter Extech
19 September 2024
30 August 2024
28 August 2024
28 August 2024
28 August 2024
23 August 2024
18 August 2024
14 August 2024
14 August 2024
13 August 2024
Bedienungsanleitung Multimeter
- BENNING
- Chauvin Arnoux
- Laserliner
- Basetech
- FERM
- Topcraft
- Kingcraft
- Multimetrix
- Megger
- TFA
- Perel
- Brandson
- Digi-tool
- Kurth Electronic
- Maxwell
Neueste Bedienungsanleitung für -Kategorien-
9 Juni 2025
8 Juni 2025
8 Juni 2025
7 Juni 2025
4 Juni 2025
31 Mai 2025
31 Mai 2025
30 Mai 2025
3 Dezember 2024
2 Dezember 2024