Extron RM 4 Bedienungsanleitung

Extron Nicht kategorisiert RM 4

Lies die bedienungsanleitung für Extron RM 4 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 10.5 Bewertungen. Hast du eine Frage zu Extron RM 4 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/1

Product Category

68-3111-01 Rev. A

03 17

Extron Headquarters

+1.800.633.9876 (Inside USA/Canada Only)

Extron USA - West Extron USA - East

+1.714.491.1500 +1.919.850.1000

+1.714.491.1517 FAX +1.919.850.1001 FAX

Extron Europe

+800.3987.6673

(Inside Europe Only)

+31.33.453.4040

+31.33.453.4050 FAX

Extron Asia

+65.6383.4400

+65.6383.4664 FAX

Extron Japan

+81.3.3511.7655

+81.3.3511.7656 FAX

Extron China

+86.21.3760.1568

+86.21.3760.1566 FAX

Extron Middle East

+971.4.299.1800

+971.4.299.1880 FAX

Extron Australia

+61.8.8113.6800

+61.8.8351.2511 FAX

Extron India

1800.3070.3777

(Inside India Only)

+91.80.3055.3777

+91.80.3055.3737 FAX

IMPORTANT:

Go to for the

complete user guide and installation

instructions before connecting the

ouchpa

nel to the power source.

RM 4 • Installation Guide

Overview

This guide provides instructions for experienced installers to use the RM 4 to mount and install the Extron TLPPro 1022M

touchpanel in a standard 19-inch equipment rack, with 5U of vertical space. For complete instructions about connecting cables

and conguring the touchpanel, see the , at TLPPro 1022 Series User Guide www.extron.com.

Preparing and Installing the RM 4

To mount RM 4 in any standard 19-inch equipment

rack, follow these instructions:

1. Secure the RM 4 to the rack using the provided

#10-32 screws (1). Ensure it is in the correct

orientation (the front of the RM 4 has stamped

into the metal).

2. Insert the four provided #8-32 screws into the

RM 4 (2). Leave enough space for the keyhole

slots of the touchpanel mounting plate to t over

the screws and slide into place.

Mounting the Touchpanel

3. Attach the mounting plate to the RM 4 (3). Ensure

the touchpanel mounting plate is in the correct

orientation with the hooks on the mounting plate at

the top and facing away from the RM 4.

4. Tighten the screws (2) to secure the mounting

plate to the RM 4.

5. If necessary, insert the provided pan head screws

and washers into the mounting screw slot on the

rear of the touchpanel (see the bottom inset of

gure 1, 4).

6. Run cables to the rack and connect them to the

rear panel of the touchpanel.

7. Hold the touchpanel at a slight angle and lower

the notches at the top of the back panel over the

hooks of the mounting plate (5).

8. Swing the bottom of the touchpanel inwards.

9. Fasten the touchpanel to the mounting plate by

tightening the pan head screws (6).

www.extron.com

Fasten the touchpanel

to the mounting plate

w/ pan head sc ws (2) inre

base of touchpanel.

Rear View

Insert pan head sc wsre

with washers (2) into the

mounting sc w slot.re

RM 4

TLP PRO 1022M

TLP Pro 1022M

Mounting Plate

#10-32 sc wsre

#8-32 sc wsre

TOP

Figure 1. RM 4 Installation

Produktspezifikationen

Marke:	Extron
Kategorie:	Nicht kategorisiert
Modell:	RM 4
Breite:	483 mm
Tiefe:	10 mm
Gewicht:	1000 g
Produktfarbe:	Schwarz
Höhe:	221 mm
Typ:	Montageset
Gehäusematerial:	Metall