Fender 46 Pro Bedienungsanleitung

Lies die bedienungsanleitung für Fender 46 Pro (2 Seiten) kostenlos online; sie gehört zur Kategorie Gitarrenverstärker/-effekte. Dieses Handbuch wurde von 33 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 2 Bewertungen. Hast du eine Frage zu Fender 46 Pro oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

A. PILOT JEWEL- Illuminates if the Professional is receiving power. Should this

bulb burn out, unscrew the red jewel and replace the lamp with a type T47 bulb.

B. INST. VOL.- Controls the loudness of the INSTRUMENT inputs ONLY.

C. MUTE SWITCH - Located under the chassis between the INST. Vol. and the

MIC. VOL. This Switch mutes the instrument inputs ONLY. It is used to mute the

guitar while still amplifying the microphone input for songs or announcements

when the guitar does not need to be amplified.

D. MIC. VOL.- Controls the loudness of the MICROPHONE input ONLY.

E. INSTRUMENT INPUTS - Both inputs have equal volume/gain and are

intended for guitar, steel guitar, or accordion inputs.

F. MICROPHONE INPUT - This is a slightly brighter input with its own volume

control. Intended as a microphone input, it sounds great with guitar too.

G. TONE - Functions as the on/off switch and as a brightness control. Any

rotation above “OFF” will turn the amplifier on. 1 is the brightest setting, getting

progressively less bright as the dial is rotated towards 12.

H. FUSE - The fuse is in the AC supply of the amplifier and will help to protect the

amplifier in the event of an electrical fault or tube failure. If a fuse blows, replace it

only with one of the same type and rating, T2A 250V. NEVER use a fuse with a

higher current rating, this could damage the equipment and present a serious

safety hazard. If the amplifier repeatedly blows fuses, it should be taken to an

authorized Fender warrantee service center.

I. LINE CORD- Your amplifier is equipped with a 3-prong grounding type supply

cord to reduce the possibility of shock due to electrical fault. Be sure to connect

it to a grounded receptacle. DO NOT ALTER THE AC PLUG!

the Professional CONTROL PANEL FUNCTIONS

CA BDEF EGH I

Note: To ensure the longevity of the electronic components of your amp, it

is important that you plug in and turn on your amplifier for at least 2 minutes

once a month.P/N 050200

Produktspezifikationen