FERM GTM1002 Bedienungsanleitung
FERM
Nicht kategorisiert
GTM1002
Lies die bedienungsanleitung für FERM GTM1002 (7 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 16 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 8.5 Bewertungen. Hast du eine Frage zu FERM GTM1002 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/7
WWW.FERM.COM
EN
LT
LV
ET
SR
BS
Original instructions 04
Originalios instrukcijos vertimas 09
Instrukciju tulkojums no oriģinālvalodas 14
Algupärase kasutusjuhendi tõlge 19
Prevod originalnog uputstva 23
Prevod originalnog uputstva 23
GTM1002
GTM1002
GTM1002
GTM1002
2
Fig. A
Fig. B1 Fig. B2
2
5
5
3
1
65
4
6
EN
Do not use the appliance if the cord is
damaged.
• If the cord becomes damaged during use,
disconnect the cord from the power supply
immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY. Do
not use the appliance if the appliance cord or
the extension cord are damaged.
• Keep extension cord away from cutting
elements.
• Always ensure the guards are fitted when
using the tool.
• Check the cable for damage before starting
work and replace if necessary.
• Inspect and maintain the trimmer regularly.
Have the trimmer repaired only by an
authorised repairer.
• Remove the plug from the power socket
before attempting any maintenance.
Danger! When Switching off the
machine, wait for the machine and its
spool to come to a complete standstill
before putting the machine down.
• Always disconnect the trimmer from the mains
when leaving the trimmer unattended.
• After extending new cutter line or replacing
the spool line. Always return the trimmer to its
normal operating position before switching on.
• Periodically inspect the condition of the cutting
head. If the spool is damaged, switch off,
remove the plug from the power point and
replace the spool.
• Do not use the machine to cut grass, which
is not on the ground. For example, do not cut
grass, which is on walls or rocks.
• Do not cross roads or gravel paths with
machine still running.
• Only use the machine according to the
instructions given in this manual.
• Do not extend the trimming line beyond the
guard and do not operate the trimmer without
both lines extended and proper line installed.
• Check regularly that the nuts, bolts and screws
are tight.
Electrical safety
Warning! When using electric tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury.
Read all these instructions before attempting to
operate this product and save these instructions.
Always check that the voltage of the
power supply corresponds to the voltage
on the rating plate.
The machine is double insulated in
accordance with EN60745; therefore no
earth wire is required.
Replacing cables or plugs
If the replacement of the supply cord is necessary,
this has to be done by the manufacturer or his
agent in order to avoid a safety hazard.
Using extension cables
Only use an approved extension cable suitable
for the power input of the machine. The minimum
conductor size is 1.5 mm
2. When using a cable
reel always unwind the reel completely.
3. ASSEMBLY
Before using, always visually inspect to
see that the blades, blade bolts and
cutter assembly are not worn or
damaged.
• Please keep power switched off and
disconnect the power supply.
Warning! You may not use the grass
trimmer without the protection guard.
Mounting the Protection guard (Fig. B1)
• Place the protection guard (5) over the
machine head as shown in Figure B1 making
sure the ridges on the protection guard fall into
the notches of the machine head.
• Turn the protection guard counter clockwise as
shown in Figure B2
• Secure the guard using the screw (6) delivered.
Produktspezifikationen
| Marke: | FERM |
| Kategorie: | Nicht kategorisiert |
| Modell: | GTM1002 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit FERM GTM1002 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert FERM
27 August 2024
17 August 2024
15 August 2024
11 August 2024
10 August 2024
8 August 2024
6 August 2024
5 August 2024
4 August 2024
3 August 2024
Bedienungsanleitung Nicht kategorisiert
- ZyXEL
- Lumel
- Infortrend
- Iiyama
- Ixxat
- Holman
- MADE
- Toolit
- Graphite
- TechniSat
- Gagato
- Hagor
- Innovaphone
- V-ZUG
- Saro
Neueste Bedienungsanleitung für -Kategorien-
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025