Fibaro FGBHFS-101 Bedienungsanleitung
Fibaro
Smarth-Startseite
FGBHFS-101
Lies die bedienungsanleitung für Fibaro FGBHFS-101 (13 Seiten) kostenlos online; sie gehört zur Kategorie Smarth-Startseite. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 10.5 Bewertungen. Hast du eine Frage zu Fibaro FGBHFS-101 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/13
CONTENTS
#1: Description and features 3
#2: Powering the accessory 4
#3: Pairing the accessory 5
#4: Physical installation 6
#5: Reset 7
#6: Functionalities 8
#7: Congurable parameters 9
#8: Specications 10
#9: Regulations 11
FIBARO FLOOD SENSOR
FGBHFS-101
O P E R A T I N G
M A N U A L
EN
v1.1
2
Important safety information
Read this manual before attempting to install the device!
Failure to observe recommendations included in this manual
may be dangerous or cause a violation of the law. The manufacturer,
Fibar Group S.A. will not be held responsible for any loss or damage
resulting from not following the instructions of operating manual.
!
HomeKit technology
Apple HomeKit technology provides an easy, secure way to control
HomeKit-enabled accessories using Siri on your iPhone, iPad, or iPod
touch.
After installing your FIBARO Flood Sensor, congure it from a
compatible app with just a few simple steps.
You can even create your own custom scenes to control your home
settings. For example, you can create a scene to automatically turn
o the lights, lock your doors, close the garage door, and set the
thermostat to the desired temperature in just one step.
To control this HomeKit-enabled accessory, iOS 9.3.5 or later is
recommended.
Controlling this HomeKit-enabled accessory automatically and
away from home requires an Apple TV with tvOS 9.2 or later or
an iPad with iOS 9.3 or later set up as a home hub.
i
3
DESCRIPTION AND FEATURES
Main features of FIBARO Flood Sensor:
• compatible with Apple HomeKit technology
• Bluetooth® low energy technology for wireless communication
• detects ooding
• detects tampering using accelerometer or when the casing is opened
• easy installation - simply put on a surface prone to ooding
• may be installed anywhere - sensor can be extended using
an external probe (not included)
• battery powered
• indicates state using LED diode and buzzer
FIBARO Flood Sensor is a HomeKit-enabled water sensor using
Bluetooth® low energy technology.
Along with detecting ooding, the accessory measures the ambient
temperature.
Tampering is detected whenever the accessory is moved or casing is
opened.
Built-in LED indicator and an acoustic alarm signal ooding and
tampering. The LED can be also used to identify the accessory.
The accessory is designed to be placed on the oor or mounted on a
wall (in this case sensor should be extended using an external probe).
The accessory is sink-proof, which means it drifts on the water surface
and keeps on sending alarm signal in case of substantial inundation
of water.
#1: Description and features
Produktspezifikationen
| Marke: | Fibaro |
| Kategorie: | Smarth-Startseite |
| Modell: | FGBHFS-101 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Fibaro FGBHFS-101 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Smarth-Startseite Fibaro
15 August 2024
14 August 2024
13 August 2024
12 August 2024
11 August 2024
11 August 2024
11 August 2024
9 August 2024
9 August 2024
7 August 2024
Bedienungsanleitung Smarth-Startseite
- Ferguson
- Sonoff
- Nedis
- Steren
- Oregon Scientific
- Trust
- Acer
- Tellur
- Gossen Metrawatt
- Gigaset
- Delta Dore
- EnerGenie
- Dormakaba
- Eufy
- Gardena
Neueste Bedienungsanleitung für -Kategorien-
14 Oktober 2024
4 Oktober 2024
2 Oktober 2024
1 Oktober 2024
27 September 2024
27 September 2024
24 September 2024
23 September 2024
21 September 2024
20 September 2024