Fibaro FGBHS-213 Bedienungsanleitung

Fibaro Intelligentes Zuhause FGBHS-213

Lies die bedienungsanleitung für Fibaro FGBHS-213 (13 Seiten) kostenlos online; sie gehört zur Kategorie Intelligentes Zuhause. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 10.5 Bewertungen. Hast du eine Frage zu Fibaro FGBHS-213 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/13

CONTENTS

#1: Description and features 3

#2: Supported loads 4

#3: Installation 5

#4: Pairing the accessory 7

#5: Reset 8

#6: Functionality 9

#7: Congurable parameters 11

#8: Specications 12

#9: Regulations 13

O P E R A T I N G

M A N U A L

FIBARO

SINGLE SWITCH

FGBHS-213

Important safety information

Read this manual before attempting to install the device!

Failure to observe recommendations included in this manual

may be dangerous or cause a violation of the law. The manufacturer,

Fibar Group S.A. will not be held responsible for any loss or damage

resulting from not following the instructions of operating manual.

Danger of electrocution!

FIBARO Single Switch is designed to operate in electrical home

installation. Faulty connection or use may result in re or electric

shock.

All works on the device may be performed only by a qualied and

licensed electrician. Observe national regulations.

Even when the device is turned o, voltage may be present at its ter-

minals. Any maintenance introducing changes into the conguration

of connections or the load must be always performed with disabled

fuse

Required overcurrent protection

FIBARO Single Switch must be protected with an overcurrent

protection (fuse) with a value not higher than 10A.

HomeKit technology

Apple HomeKit technology provides an easy, secure way to control

HomeKit-enabled accessories using Siri on your iPhone, iPad, or iPod

touch.

After installing your FIBARO Single Switch, congure it from a

compatible app with just a few simple steps.

You can even create your own custom scenes to control your home

settings. For example, you can create a scene to automatically turn

o the lights, lock your doors, close the garage door, and set the

thermostat to the desired temperature in just one step.

To control this HomeKit-enabled accessory, iOS 9.3 or later is re-

commended.

Controlling this HomeKit-enabled accessory automatically and

away from home requires an Apple TV with tvOS 9.2 or later or

an iPad with iOS 9.3 or later set up as a home hub.

DESCRIPTION AND FEATURES

Main features of FIBARO Single Switch:

• Compatible with Apple HomeKit technology,

• Bluetooth® low energy technology for wireless communication,

• Advanced microprocessor control,

• Works with various types of switches – momentary, toggle,

three-way, etc,

• To be installed in wall switch boxes of dimensions allowing for

installation, conforming to provisions of applicable regulations,

• FIBARO Single Switch is an extension unit.

FIBARO Single Switch is designed to be installed in standard wall

switch boxes or anywhere else where it is necessary to control electric

devices.

FIBARO Single Switch allows to control connected devices either via

HomeKit technology (using ® low energy) or via a switch Bluetooth

connected directly to it and is equipped with active power and energy

consumption metering functionality.

#1: Description and features

Produktspezifikationen

Marke:	Fibaro
Kategorie:	Intelligentes Zuhause
Modell:	FGBHS-213
Breite:	38.25 mm
Tiefe:	42.5 mm
Produktfarbe:	Weiß
Steuerung:	Tasten
Übertragungstechnik:	Kabellos
Höhe:	20.3 mm
Energiequelle:	AC
Befestigungstyp:	Wand
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Betriebstemperatur:	0 - 35 °C
Zertifizierung:	RED 2014/53/EU, RoHS 2011/65/EU
Menge pro Packung:	1 Stück(e)
Schnittstelle:	Kabellos
Wireless-Technologien:	Bluetooth
Funkfrequenz:	2400 MHz
Eingangsstrom:	8 A
Wandplattenbreite:	50 mm
Wandplattentiefe:	60 mm