Fisher & Paykel ADDW60PB Bedienungsanleitung

Lies die bedienungsanleitung für Fisher & Paykel ADDW60PB (1 Seiten) kostenlos online; sie gehört zur Kategorie Spülmaschine. Dieses Handbuch wurde von 34 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 17.5 Bewertungen. Hast du eine Frage zu Fisher & Paykel ADDW60PB oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

INSTALLATION GUIDE

Accessory door panels

DISHWASHER DOOR PANEL INSTALLATION

431192A 02.23 NZ AU

Install handle as per handle

installation guidance.

1

SAFETY & WARNINGS

Ensure a 2mm minimum ventilation gap below the

door is maintained.

Ensure all packaging is removed and disposed

obly.f responsi2

3

Hang door panel.

Secure door panel by replacing

4 screws along the top edge

of inner door with M3 x 31mm

screws.

6

7

8

!0

Secure door panel by replacing 4

screws along the sides with 3.9 x

38mm screws.

Cut the exit vent as shown.

Check door balance. Refer to

installation guide for details.

For more information, visit www.fisherpaykel.com

!WARNING!

Electric Shock Hazard

Failure to follow this advice may result in

electrical shock or death.

• Read and follow the safety and warnings before

operating this appliance.

COMPONENTS REQUIRED

Slider (1)4 x 13mm screws (4)

4

Align door panel by sliding the

accessory door until the top of

the door panel sits above the top

of the control panel.

!WARNING!

Cut Hazard

Failure to use caution could result in injury.

• Take care: some edges may be sharp.

Supplied with appliance

3.9 x 38mm screws

(4)

3.5 x 11mm screws

(2)

Exit vent (1)

Supplied with door kit

Accessory panel (1)M3 x 31mm screws (4)

Not supplied

9Slot the exit vent into the product

and secure using two 3.5 x 11mm

screws.

Handle (1)

TALL PRODUCT

STANDARD PRODUCT

2

7

Remove the four screws along

the top of the inner door.

Remove the four screws on the

sides of the inner door.

5

STANDARD DOOR

STANDARD DISHWASHER

STANDARD DOOR

TALL DISHWASHER

TALL DOOR

Secure the sliding

bracket and top as

shown with 4 x 13mm

screws.

Ensure ratchet is

correctly oriented,

allowing the door to

be adjusted freely.

Produktspezifikationen