Fisher & Paykel AHD5DDDW60B Bedienungsanleitung

Lies die bedienungsanleitung für Fisher & Paykel AHD5DDDW60B (1 Seiten) kostenlos online; sie gehört zur Kategorie Spülmaschine. Dieses Handbuch wurde von 19 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 10 Bewertungen. Hast du eine Frage zu Fisher & Paykel AHD5DDDW60B oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

INSTALLATION GUIDE

Accessory handles

FITTING HANDLE TO PANEL

431059A 10.22 NZ AU HK SG TW UK IE EU CN

Custom panel installations:

Mark the handle location on the

panel. Ensure distance between

holes is 432mm.

1

SAFETY & WARNINGS

2

3

Custom panel installations:

Drill the holes using a 6mm drill

bit. Counterbore from the rear.

Align the pin locks to the front

of the panel before inserting the

supplied screws from the rear of

the panel.

Custom and Dishwasher panels:

Countersunk screw

DishDrawer panels:

Pan head screw

Secure pin locks by tightening

the screws using a crosshead

driver. Do not overtighten.

4

5

6

Loosen the grub screws and fit

the handle onto the pin locks.

Tighten the grub screws using

the supplied hex key.

For more information, visit www.fisherpaykel.com

!

WARNING!

Cut Hazard

Failure to use caution could result in injury.

• Take care: some edges may be sharp.

z

For products that are not front-mounted, installation

must be carried out by a Fisher & Paykel trained and

supported service technician.

z

Ensure all packaging is removed and disposed

of responsibly.

z

Installation of this product requires basic

mecls. hanical skil

z

Ensure product is installed with the correct tools to

avoid personal injury or damage to the appliance.

z

Take care not to scratch the door with the supplied

Hex key when tightening the screws.

COMPONENTS REQUIRED

2mm hex key (1)

Grub screw (2)

Pin lock (2)

M5x25mm countersunk

screw (2)

Handle (1)

Crosshead driverPowered driver

Tape measure

M5x25mm pan head

screw (2)

Supplied

Not supplied

Level

432mm

Produktspezifikationen