FlinQ FQC8143 Bedienungsanleitung
FlinQ Erleichterung FQC8143
Lies die bedienungsanleitung für FlinQ FQC8143 (8 Seiten) kostenlos online; sie gehört zur Kategorie Erleichterung. Dieses Handbuch wurde von 43 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 22 Bewertungen. Hast du eine Frage zu FlinQ FQC8143 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/8
FlinQ LED Iceman light
FQC8143
USER MANUAL
Thank you for purchasing this FlinQ LED Iceman Light!
Please fully charge this device before use!
It takes about 3hours to fully charge it.The LED indicator will flash during charging and stays on when fully charged. The battery
supportsportable use for 20hours under warmyellow light and 15 hours under RGB 7 color changing mode. If no action is
done the light will switch off automatically after 2 hours to save the battery power.
Please read this user manual completely before using the device and save it for the future.
GENERAL INFORMATION
1.Iceman Silicone body
2.Micro-USB charge/power input
3.Power on/off button
4.LED indicator
SPECIFICATIONS
Input: 5V/1A
Body material: Silicone
Type of built-in battery: Li-ion
Battery capacity: 1200mAh/4.44Wh
MAX power*:up to 0.15W(white)/ up to 0.3W(color)
Working time: up to 20 hours(white) max/ up to15 hours(color) max
Lifetime LED: Up to 30000 hours
Size:116x117x180mm
*brightness may decrease during operation as battery discharges. Maximum brightness achieved when the battery is fully charged!
HOWTO CHARGE
1.Turn off the LED lamp
2.Plug your Iceman LED Lamp into your PC’S USB port ora wall USB charger(not supplied, you can use it from any
smartphone/tablet device) with the USB charging cable(supplied)
3. LED indicator blinks red while charging. When LED indicator stops blinking, the charging is complete
HOWTOUSE
Power ON/OFF:
Short press the power button to turn on. Presspower button again to turn off. If there isn’tanyaction, Iceman LED
lamp will automatically turn off in 2 hours
MODE CONTROL
Mode 1 activates when the power is on. To change operating modes tap hard on the device’s body or take it by the
hand and put it down again on a table or desk to change it.
Operating modes:
Mode 1: Device continuously turns white
Mode 2: Gradient change of colors: white-blue-red-green-purple-light blue-orange
Mode 3: Device continuously gives the color selected in mode 2
Produktspezifikationen
| Marke: | FlinQ |
| Kategorie: | Erleichterung |
| Modell: | FQC8143 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit FlinQ FQC8143 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Erleichterung FlinQ
25 August 2024
24 August 2024
23 August 2024
22 August 2024
22 August 2024
22 August 2024
22 August 2024
Bedienungsanleitung Erleichterung
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
13 Oktober 2024
13 Oktober 2024
9 Oktober 2024
8 Oktober 2024
8 Oktober 2024
7 Oktober 2024
7 Oktober 2024
6 Oktober 2024
5 Oktober 2024