Fluke BP291 Bedienungsanleitung
Lies die bedienungsanleitung für Fluke BP291 (2 Seiten) kostenlos online; sie gehört zur Kategorie Akku. Dieses Handbuch wurde von 36 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 18.5 Bewertungen. Hast du eine Frage zu Fluke BP291 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
PN 4707531
July 2015
2015 Fluke Corporation. All rights reserved.
Specifications are subject to change without
notice. All product names are trademarks of
their respective companies.
BP290/BP291
Li- ion Battery Pack
Instruction Sheet
Introduction
BP290 and BP291 are Li-ion battery packs for use in the Fluke 190
Series II ScopeMeter Test Tools, the Fluke 430-II Power Quality Test
Tools, and other portable Fluke test tools. Check the users manual of
your test tool for compatibility. Within the battery pack, a microcontroller
keeps record of the charge condition of the battery and an LED indicator
is provided that informs you about the actual charge condition. The
indicator ha four LEDs and a test button. s
The battery charges when installed in the test tool or with the external
charger EBC290. To replace the battery in your test tool, see the users
manual for the test tool.
These battery packs have been tested in accordance with and comply to:
•UN Manual of Tests and Criteria Part III Subsection 38.3
(ST/SG/AC.10/11/Rev.5) – also known as the UN T19.T8 tests
•IEC62133
•DOT/IATA
Contacting Fluke
To contact Fluke, call one of the following telephone numbers:
•Technical Support USA: 1-800-44- -800-443-5853)FLUKE (1
•Calibration/Repair USA: 1-888-99- -888-993-5853)FLUKE (1
•Canada: 1-800- - -800-363-5853)36 FLUKE (1
•Europe: +31 402-675-200
•Japan: +81-3- -31146714
•Singapore: +65-6799-5566
•Anywhere in the world: +1-425-446-5500
Instructions
To use the BP290 with a 190 Series II ScopeMeter or 430-II Power
Quality Analyzer:
1. Carefully check for proper positioning of the support plate before
you remove the protective layer from the self-adhesive side of the
support plate. See in gure. A
2. Install the support plate on the battery pack . B
3. Place the battery with the support plate into the groove of the battery
compartment. Press rmly to make sure the battery is placed
correctly . C
The 291 does not need any modication before you install the battery BP
pack into the test tool.
The battery pack has an indicator four LEDs (25 %, 50 %, 75 %, and with
100 % charge) and a test button.
To check the battery charge:
1. Push . The LEDs light to show the battery charge level. T
If all four LEDs are on, the battery charge is at of capacity. 100 %
Produktspezifikationen
| Marke: | Fluke |
| Kategorie: | Akku |
| Modell: | BP291 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Fluke BP291 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Akku Fluke
8 Oktober 2024
6 August 2024
29 Juli 2024
28 Juli 2024
26 Juli 2024
24 Juli 2024
Bedienungsanleitung Akku
- Stiga
- Gardena
- Carat
- Wentronic
- Red Power
- TOA
- BlackVue
- Cobra
- Kress
- Sungrow
- Fxlion
- PowerBass
- A-solar
- Varta
- Berg
Neueste Bedienungsanleitung für -Kategorien-
6 Oktober 2024
Arris SURFboard Touchstone Battery BPB022S Bedienungsanleitung
29 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
21 September 2024
21 September 2024
21 September 2024