Fluke i410 Bedienungsanleitung

Lies die bedienungsanleitung für Fluke i410 (10 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 79 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 40 Bewertungen. Hast du eine Frage zu Fluke i410 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

PN 642733 December, 1996 1996 Fluke Corporation. All rights reserved. Printed in U.S.A. Product names are trademarks of their respective companies.

i410/i1010

AC/DC Current Clamp

Service Information

WWarning

To avoid electric shock:

•Do not service this Current Clamp unless you are qualified to do so.

The service information provided in this document is for use by quali-

fied personnel only.

•Always remove input signals from the Current Clamp before opening

the case.

•Be careful when working with voltages that exceed 30V ac rms, 42.4V

pk, or 60V dc.

•The Current Clamp is protected throughout by double insulation. When

servicing the Current Clamp, use only specified replacement parts.

Caution

•If the Current Clamp is to be Calibrated, you must have a replacement

decal. See the Replacement Parts section for further details.

•This Current Clamp contains parts that can be damaged by static dis-

charge. Follow the standard practices for handling static sensitive de-

vices.

Introduction

Service Information covers the following service-related areas for the i410/i1010 AC/DC Current

Clamps:

•Product specifications

•Required equipment

•Performance test procedure and test values

•Preparing for calibration

•Calibration procedure

•Reassembly procedure

•Replacement parts

Usually, service information in this document applies to both models (i410 and i1010). Information ap-

plicable to only one model is so noted. For operating information, refer to the Instruction Sheet that came

with the Current Clamp.

®

Produktspezifikationen