Fluke SmartTrace BK120 Bedienungsanleitung
Fluke
Nicht kategorisiert
SmartTrace BK120
Lies die bedienungsanleitung für Fluke SmartTrace BK120 (9 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 2 Bewertungen. Hast du eine Frage zu Fluke SmartTrace BK120 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/9
BK120
SmartTrace
TM
Breaker Finder
Users Guide
9/2023, Rev. 1, 8/24 (English)
© 2023-2024 Fluke Corporation. All rights reserved.
Specications are subject to change without notice.
All product names are trademarks of their respective companies.
1
BK120
Users Guide
Introduction
The BK120 is a system to locate breakers in an electrical installation and
to detect voltage. The system comprises the Transmitter and the Breaker
Finder (the Product).
Contact Fluke
Fluke Corporation operates worldwide. For local contact information, go to
our website: www.uke.com.
To register your product, view, print, or download the latest manual or manual
supplement, go to our website. For service information, contact your nearest
Fluke dealer.
Product Use
Transmitter
1. For best results, unplug all appliances and equipment on the circuit
under test.
2. Plug the Transmitter into the socket and note which indicators light.
3. To determine the wiring, see the diagram on the Product shown for
reference in Figure 1.
Figure 1. Transmitter
1
2
CORRECT
OPEN GROUND
OPEN NEUTRAL
OPEN HOT
HOT / NEUT. REV.
HOT / GRD. REV.
1
Red LED illuminates when you push the GFCI test button
2
Receptacle wiring check
lndicator Wiring Scenario Description
CORRECT Receptacle is wired correctly
OPEN GROUND Ground contact is not wired
OPEN NEUTRAL Neutral contact is not wired
OPEN HOT Hot contact is not wired
HOT / NEUT.REV. Hot and neutral wirings are reversed
HOT / GRD.REV. Hot and ground wirings are reversed
W Caution
Use the Product as a simple instrument to detect nearly all
probable common improper wiring conditions. Read the Safety
Information that is provided with the product package.
2
GFCI Test
To test a GFCI:
1. Before you plug the Product into a GFCI socket, push the GFCI test
button, if applicable, to trip the GFCI socket. If the GFCI does not trip, the
socket is faulty and should be replaced.
2. After the GFCI trips, push the RESET button on the GFCI socket.
3. Plug in the Product and push the blue GFCI test button on the Product for
a minimum of 6 seconds. As you push the Product button, but before the
GFCI trips, the LED to the left of the Product button briey turns on.
Once the GFCI trips, all of the LEDs on the Product go out. If the GFCI
does not trip, or if any of the LEDs on the Product remain on, there is a
problem with the wiring of the socket, the socket itself, or the Product.
Consult an electrician to determine the problem.
Breaker Finder
Figure 2. Breaker Finder
1
3
2
4
5
6
1
NCV indication
2
Breaker nder indication
3
Power button
4
Function selector
5
Tactile barrier
6
Flashlight
Power On/O
Momentarily push
. Listen for a single beep to conrm activation. The
Product performs a self-test upon powering ON, emitting beeps and light
indications to ensure the proper visual and audio indications. A solid light on
indicates the Product is active.
1 sec.
ON
Push
> 1 s to turn the product o. Listen for a double beep to
conrm de-activation.
1 sec.
OFF
SmartTrace
TM
Breaker Finder
Product Use
Produktspezifikationen
| Marke: | Fluke |
| Kategorie: | Nicht kategorisiert |
| Modell: | SmartTrace BK120 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Fluke SmartTrace BK120 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Fluke
14 Juni 2025
11 Juni 2025
8 Oktober 2024
5 Oktober 2024
23 September 2024
21 September 2024
20 September 2024
10 September 2024
5 September 2024
Fluke IntelliTone Networks MT-8200-60-KIT Bedienungsanleitung
5 September 2024Bedienungsanleitung Nicht kategorisiert
- FCC BBQ
- MedFolio
- Eonon
- Gigaset
- Redrock Micro
- Schertler
- CMI
- Cambo
- Aurora
- Naim
- Calor
- JIMMY
- IDEAL
- Profizelt24
- Be Cool
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025