Fluke SureGrip 80PK-26 Bedienungsanleitung

Lies die bedienungsanleitung für Fluke SureGrip 80PK-26 (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 35 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 18 Bewertungen. Hast du eine Frage zu Fluke SureGrip 80PK-26 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

®

80PK-26

SureGripTM Tapered

Temperature Probe

Instruction Sheet

XWWarning

To avoid electrical shock, do not use this

probe when voltages exceeding 24 V ac rms

or 60 V dc are present. The probe tip is

electronically connected to the output

terminals.

Introduction

The 80PK-26 SureGripTM Tapered Temperature Probe is

essentially a bead probe with a handle that can be used

as a surface probe. The stainless steel sheath allows the

bead to measure temperatures higher than bead probes

with flexible leads. The handle also allows you to apply

more focused surface pressure without having your hand

in close proximity to the source. The 40-inch (1-meter)

cable is terminated with a Type K miniature thermocouple

connector with 0.792-mm (.312-in) pin spacing. The

80PK-26 can be used with any temperature-measuring

instrument that is designed to accept Type K

thermocouples and has miniature connector input.

Specifications

Type

K Standard Grade Ni-Cr vs Ni-Al (Chromel vs Alumel)

Measurement Range

-40 °C to 816 °C (-40 °F to 1500 °F)

Accuracy

(With respect to ANSI MC96.1-1982-Standard Limits of

Error):

Note

All error calculations should be done in

°

C, then

scaled to

°

F.

Range Accuracy

(% of reading)

-40 °C to 293 °C

(-40 °F to 559.4 °F)

±2.2 °C

293 °C to 816 °C

(559.4 °F to 1500 °F)

±0.75 %

November 2004 Rev.2, 9/09

© 2004-2009 Fluke Corporation. All rights reserved.

All product names are trademarks of their respective companies

Produktspezifikationen