Flycam Flowline Starter Bedienungsanleitung
Lies die bedienungsanleitung für Flycam Flowline Starter (8 Seiten) kostenlos online; sie gehört zur Kategorie Stativ. Dieses Handbuch wurde von 40 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 20.5 Bewertungen. Hast du eine Frage zu Flycam Flowline Starter oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/8
1
What s In The Box’
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
Flowline Starter with Edge V1 Stabilizaon Arm
(FLCM FLN EGV1) - -
Flycam Flowline
Starter
Edge V1 Arm
Bag Packing
2 x Washers
2mm Allen Key
2.5mm Allen Key
2 x Velcro
A s s e m b l y M a n u a l
2
• Similarly, remove the second screw.
• Now, remove the Hook from the Flowline
Support Arm.
• As shown in the image, take the Cord
bundle out from the Cup and pull the Cord
unl a Cord lock comes out.
• Separate the Cord and the Cord lock.
• Keep the lock aside to re aach it later.-
Flowline Starter with Edge Setup
• Loosen the screw of the Camera Hook
aached to the Flowline Support Arm using
the Allen key.
• Similarly, separate the Cord from the Cup to
mount it back later.
NOTE: It is recommended to aach the minimum required weight (3kg / 6.6lb) for pulling down the
balancing rope to ensure proper operaon of your Flycam Flowline system.
3
• To detach the Flowline Support Rod
pull it upwards.
• To detach the extension from the Support
Rod of the Vest, remove its screw using a
screwdriver.
• Detach the extension from the Support Rod
and align the cord with the height riser,
(Not Included) as shown in the image.
• Dissemble the Camera Hook and the
Support Rod from the Vest.
• Aach the extension with the height riser
(Not Included) and push it inside.
Feature: Height riser that oers up to 4" of
vercal extension for taller operators and a
lockable hook to secure any camera, gimbal,
or cage eortlessly.
Produktspezifikationen
| Marke: | Flycam |
| Kategorie: | Stativ |
| Modell: | Flowline Starter |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Flycam Flowline Starter benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Stativ Flycam
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
Bedienungsanleitung Stativ
- Kodak
- FeiyuTech
- Panasonic
- Fidlock
- Libec
- Explore Scientific
- Camgear
- AVerMedia
- Barska
- Manfrotto
- Studio Assets
- Sirui
- Slik
- IOptron
- Gitzo
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025