Foscam FI9902P Bedienungsanleitung

Foscam Sicherheitskamera FI9902P

Lies die bedienungsanleitung für Foscam FI9902P (3 Seiten) kostenlos online; sie gehört zur Kategorie Sicherheitskamera. Dieses Handbuch wurde von 44 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 22.5 Bewertungen. Hast du eine Frage zu Foscam FI9902P oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/3

2 Physical Description

V2.1

305503000460

Quick GuideSetup

Security Tips

Package Contents

Wi-Fi Antenna

Power Adapter IP Camera

Quick Setup Guide

Setting Up Your Camera:

the Wired Connection via Foscam

App (Recommended)

Setting Up Your Foscam

Security Camera

Getting Started

To view this guide in other languages (e.g. Nederlands, Deutsch,

Français, Español), and for detailed manuals, tools, etc., please visit

foscam.com/downloads.

Antenna

Micro SD Card Slot

Lens

Infrared LED

LAN

Audio in/out

Power

Reset Button

To ensure a smoother video experience on your smart phone, it is

recommended that your smart phone meet the following specications:

iOS: version 8.1 or higher.

Android: 4.1 or higher, using a device with a Graphics Processing

Unit (GPU).

Warning:

Quick Set up G uide

Note: FI9800P does not support Micro SD card.

Before You Get Started

2. Connect the camera to your router with an Ethernet cable.

3. Plug the power adapter into the camera, and then wait for about 1

minute.

4. Make sure your smart phone is connected to the same WiFi network as

the camera.

6. After logging into Foscam APP, select “Tap to add a camera” or " " +

icon on the upper right corner, then select " " and Scan the QR code

scan the QR code that labeled at the bottom of your camera.

Scan the QR code which

is located at the bottom

of your camera.

Tap + icon

Tap to add a camera

Add Device

Scan the QR code

Search in LAN

Manually add

Select ”Scan

the code”

Scan QR Code

Mo del: XXX

M AC ID:000000000000

Username(default):admin

Pass word(default):(blank)

DDNS:XXXX XX.

myfoscam.org

FCC ID:X XXXX

IC:12558A-XX

S/N:F I AI14 03 000 00 1

UID:XXXXXXXXXXX

FHD Wi re le s s I P Cam e ra

7.1 Please wait for a few seconds, you can tap "Congure WiFi" in

"Congure WiFi" interface, then select your WiFi network and enter

your WiFi's password. After, you can set the camera name and tap

“ ” in "Set name" interface.Save

Conrm

WiFi connec tion

WPSWPS

Router

Congure WiFi

Set name

Save

Camera added successfully

Please set the camera name:

My Camera

Select your WiFi

Network and enter

your WiFi's password

Camera added

successfully and

name has been set

5. Open the foscam APP and please register a Foscam account, or sign in if

you have one already.

7. There are two options in the following steps, please pay attention to

choose the corresponding adding method.

Please change the camera's password regularly, using a combination

of numbers, letters and special characters.

We recommend that you regularly update your camera with the latest

available software and rmware to ensure the best experience with

your camera.

The cords on this product are a potential strangulation hazard. For child

safety, please keep these cords out of the reach of children.

Scan the QR code below to download and install the Foscam APP.

1. Please tighten the antenna clockwise and make sure it is in a vertical

position.

Tighten

clockwise

Wired Connection

Note: For the best experience, please update the APP to the latest version!

Tips: You need to connect to the 2.4GHz network if your WiFi router is

dual-band—most newer routers have both 2.4GHz and 5GHz

channels. For example, choose SSID: XXXXX_2.4G.

WiFi Settings

WiFi_1

WiFi_2

WiFi_3

WiFi_4

No WiFi Configuration

Select WiFi Network...

Note: It is strongly recommended that you choose to congure WiFi at

this step.

Foscam_1

Foscam_2

xxxxx_2.4G

xxxxx_5G

Configure WiFi

7.2 Please wait for a few seconds, you can tap "Congure WiFi" in

"Congure WiFi" interface, then you tap " " in the "WiFi Settings" Skip

interface. After, you can set the camera name and tap “ ” in "SetSave

name" interface.