Furman BATT1500-EXT Bedienungsanleitung
Furman
Nicht kategorisiert
BATT1500-EXT
Lies die bedienungsanleitung für Furman BATT1500-EXT (12 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 25 Personen als hilfreich bewertet und erhielt im Schnitt 3.5 Sterne aus 13 Bewertungen. Hast du eine Frage zu Furman BATT1500-EXT oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/12
User’s Manual
BATTERY PACK BATT1500-EXT
By
Panamax
~
Furman
Introduction
Overview:
The PFPower external battery pack (BATT1500-EXT) is designed for variety of Panamax and Furman UPS systems.
When combined with the UPS, the battery pack provides extended runtime with a 48V DC external connection.
Unpacking:
•Twoadjustiblelengthrackmountingrailsandhardware
•Twofrontmountingears
•Oneuser’smanualbasicoperationguide
BATT1500-EXT
1690 Corporate Circle, Petaluma, CA 94954 www.panamax.com or www.furmansound.com
Phone: 707-283-5900 Fax: 707-283-5901
Copyright©2009PFPower
INS00857 REV. A ENGLISH
2
BANK 1 CRITICAL
LOAD
USB
IR1
IR OUT IR STAT US
IR2
15A PUSH
TO RESET
MAIN POWER
125 / 12A
COMMUNICATION CARD
EXTERNAL BATTERY
BANK 2 CRITICAL
LOAD
BANK 3
NON
CRITICAL
LOAD
BANK 4 NON
CRITICAL
LOAD
PUSH TO RESET, 15A
PUSH TO RESET, 15A
NON-CRITICAL LOAD
CRITICAL LOAD
OUTPUT:
48V ON
OFF
RED
BLACK
GREEN
Installation Guide
The UPS is supplied with rack mounting rails, mounting ears, and all the hardware.
Follow the below steps to complete the rack installation.
1. BATT1500-UPS must be installed directly underneath the UPS
2. Attach the mounting ears to each side of BATT1500-EXT
3. Attach the adjustable length rack mounting rails to the rack.
4. Slide the BATT1500-EXT into the rack on the rails
5. Use screws to secure the mounting ears to the rack
6. CAUTION! - Turn off the UPS that BATT1500-UPS will be connected to
7. CAUTION! - Switch the circuit breaker on BATT1500-UPS to the OFF position.
8. Connect the battery pack’s output cable assembly into the UPS’s input port
9. Ensure that the colors of the battery pack cable and UPS input port are
matched: red-red, black-black, green-green.
10. Switch the circuit breaker on BATT1500-EXT to the ON position
11. Turn on the UPS on.
12. In the UPS setup menu, configure the UPS to use an external battery pack. Refer to the UPS manual for details.
4
3
2
5
7
8
9
10
UPS
BATT1500-EXT
1
INSTALLING BATT1500-EXT INTO RACK
TURN UPS AND BATT1500-EXT OFF
CONNECT THE BATT1500-EXT TO THE UPS
TURN UPS AND BATT1500-EXT ON
3
TROUBLE SHOOTING
SPECIFICATIONS
ACPOWER
Voltage 48V
PHYSICAL
Dimensions (in) 2U Rack, 17”x19”x3.5”
Weight (lbs) 70
BATTERY
SealedMaintenanceFreeLeadAcidBattery12V/9.0AHX8
Interface PP75
ENVIRONMENTAL
Operating Temperature 32˚F to 104˚F℉ (0˚C ℉to 40℉)
OperatingRelativeHumidity0to95%
SAFTEYAPPROVALS
CerticationsFCCClassBcertied,cUL,UL1778
RoHSRoHSCompliant
WARRANTY
2yearwarranty,FreeTechSupport
Please contact Panamax Customer Service for information regarding
battery replacement.
If you require technical support or equipment service, please contact
the Panamax Service Department at 800-472-5555. You may also
email info@Panamax.com.
All equipment being returned for repair must have a Return Authoriza-
tion (RA) number. To get an RA number, please call the Panamax Service
Department.
Before returning any equipment for repair, please be sure that it is ad-
equately packed and cushioned against damage in shipment, and that
it is insured. We suggest that you save the original packaging and use it
to ship the product for servicing. Also, please enclose a note giving your
name, address, phone number and a description of the problem.
Contacting Customer Service
PROBLEM
The UPS LCD does not per-
form expected runtime.
The battery pack does
not work.
POSSIBLE CAUSE
Do not set the UPS to
recognize the battery.
Batteries are not fully
charged.
The status of circuit
breaker is off.
The fuse blew.
SOLUTION
Verify that the UPS is setup to use the External
Battery. Refer to the UPS manual for details.
Allow the battery pack to charge for 24 hours. Do not
expect full runtime during this initial charge period.
Specified battery pack models can use AC to shorten
charge time.
Switch on the circuit breaker.
Contact PFPower, Panamax, Furman.
Open the cover on the rear panel and replace with
new fuse.
Produktspezifikationen
| Marke: | Furman |
| Kategorie: | Nicht kategorisiert |
| Modell: | BATT1500-EXT |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Furman BATT1500-EXT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Furman
26 Juli 2025
26 Juli 2025
26 Juli 2025
25 Juli 2025
25 Juli 2025
25 Juli 2025
6 September 2024
6 September 2024
6 September 2024
6 September 2024
Bedienungsanleitung Nicht kategorisiert
- Hugo Muller
- Nils Extreme
- Navman
- Solid
- SumUp
- Imarflex
- Bison
- Mobeye
- Bals
- JLab
- Shimbol
- British Telecom
- Hasbro
- Würth
- Trust
Neueste Bedienungsanleitung für -Kategorien-
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025