Futaba SkyLeaf-ST Bedienungsanleitung


Lies die bedienungsanleitung für Futaba SkyLeaf-ST (22 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 3 Bewertungen. Hast du eine Frage zu Futaba SkyLeaf-ST oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/22
INSTRUCTION MANUAL
Locate the center horizontal fuse and both wing
panels. As you will notice bothwings
have different
sized domes where they connect to the fuse. Make
sure to match them to
the appropriate sized dome
Take your rear horizontal fuse and coat the area
where the wing will meet it with
accelerator. This
will help to ensure a strong bond.
Locate all of your hinged surfaces. Place them in a
folded position with the seam facing the
inside of the
fold and place weights on top of them for 30-60 min.
hinge and allow the surface to
move freely.
Major components laid out flat on table
*NOTE manual reads top row before
proceeding to the bottom row of the page.
Spray the front horizontal fuse with acceleratorNow apply another bead on the front mating portion of the same wing.
Join the wing and the horizontal fuse and allow to dry.
Take medium CA and put a consistent bead along the rear
mating portion of the right wing


Produktspezifikationen

Marke: Futaba
Kategorie: Nicht kategorisiert
Modell: SkyLeaf-ST

Brauchst du Hilfe?

Wenn Sie Hilfe mit Futaba SkyLeaf-ST benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten