Gamber-Johnson 7160-1884-00 Bedienungsanleitung
Gamber-Johnson
Ladestation/Dockingstation
7160-1884-00
Lies die bedienungsanleitung für Gamber-Johnson 7160-1884-00 (4 Seiten) kostenlos online; sie gehört zur Kategorie Ladestation/Dockingstation. Dieses Handbuch wurde von 22 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 11.5 Bewertungen. Hast du eine Frage zu Gamber-Johnson 7160-1884-00 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/4

7160-1884
DELL 7030 TABLET KEYBOARD CRADLE
Rev A
INST-1143
Printing Spec:
PS-001
© Copyright 2022 Gamber-Johnson, LLC
This instruction sheet is for the following products:
Item No. 7160-1884-00
1 / 4
This instruction sheet is for the Dell 7030 Tablet Keyboard Cradle only. For instructions on
features, set-up, and operation of the Dell 7030 Tablet, please refer to the manual provided
by Dell with the Tablet.
This cradle is designed to be used with a variety of Gamber-Johnson mounting systems.
Installation instructions for other Gamber-Johnson products are provided with each individual
product.
A USB-C Power Adapter is required to charge the tablet in the cradle, the below power adapter is
sold separately unless ordered through a KIT.
7300-0621
- 11-16VDC Input - 100W USB-C Output - Available with the Keyboard Cradle as a KIT:
7170-1056-00
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Form
Revision
Product
INSTALLATION INSTRUCTIONS
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brake lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

Guide
Pins
Release Latch
Lock
Keyboard
Tray Adjustment
Knobs
Keyboard
Tray
Keyboard
Latch
Stylus Holder
Hand Strap & Magnetic
Mount Clearance
KEYBOARD TRAY LOCK
- REMOVE LEFT ADJUSTMENT
KNOB AND PLACE IN THIS
LOCATION TO SECURE
KEYBOARD TRAY IN THE
"DOWN" POSITION
Mounting Studs
1/4-20 x 0.625"
Mounting HW Provided
Recommended Torque = 15in/lbs
Warranty
Label
Keyboard Tray
Adjustment Knobs
RECOMMENDED: USE LOCKING
KNOB LOCATION WHEN KEYBOARD
IS IN USE (SEE ABOVE)
Cradle Label
Contains:
Product Information,
MFG Date, Ect.
DELL 7230 TABLET KEYBOARD CRADLE
FEATURE IDENTIFICATON
2 / 4

DELL 7030 TABLET KEYBOARD FOAM PADS
Included in each Keyboard Cradle shipment is 2x round foam
pads. These need to be placed on the front Left/Right
corners of the Dell 7030 Keyboard as shown below. These
pads allow the cradle tablet latch to fully enage when the
keyboard is closed against the tablet face.
3 / 4
Produktspezifikationen
Marke: | Gamber-Johnson |
Kategorie: | Ladestation/Dockingstation |
Modell: | 7160-1884-00 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Gamber-Johnson 7160-1884-00 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Ladestation/Dockingstation Gamber-Johnson
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
30 August 2024
30 August 2024
30 August 2024
Bedienungsanleitung Ladestation/Dockingstation
- Ewent
- Nedis
- Alecto
- Renkforce
- Onkyo
- Zagg
- Kogan
- Marmitek
- DreamGEAR
- Deltaco
- Socket Mobile
- TEAC
- Jam
- Philips
- Inter-Tech
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
8 Oktober 2024
7 Oktober 2024
5 Oktober 2024
4 Oktober 2024
3 Oktober 2024
2 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024