Garde XL 181BRGPBASE Bedienungsanleitung


Lies die bedienungsanleitung für Garde XL 181BRGPBASE (4 Seiten) kostenlos online; sie gehört zur Kategorie Anderes Küchengerät. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Garde XL 181BRGPBASE oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
#181BRGPR14 #181BRGPR13 #181BRGPR12
#181BRGSL2 #181BRGSL3
#181BRGPBASE
9/2022
Burger Presses
ASSEMBLY CHART
Semi-Finished
Step 1:
Step 2:
Step 3:
Finished
Unfasten knobs and li top plate assembly. Ensure bumpers are on each of the 4 threads. Slide burger press tray in between bumpers and then
place top plate assembly through threads. Place the ring pin with plasc stopper through the center of the burger press tray. Thread hopper onto
top plate assembly. Insert handle stand through threads, then refasten knobs.
Fasten green handle to arm using the acorn nut provided. Secure handle assembly to push plate assembly using the ringpins.
Insert the push plate into the burger meat reservoir and secure the back arm to the handle stand using a ringpin.
Safety Instrucons
Operang Instrucons
Cleaning and Maintenance
Please read and comply with the instrucons listed on this document. To get the best service life and
performance from your machine, clean it thoroughly before and aer each use by following
the instrucons listed below.
Burger press should only be operated by trained individuals. Be sure to read the operaon, assembly, and cleaning
guides before using.
Cauon: This product should only be used to form raw ground meats.
1) Li handle and ll hopper with ground meat.
2) Align push plate into hooper.
3) Push tray completely into press.
4) Use handle to press down and slowly pull tray out as you press down.
5) Remove paes from tray and repeat.
1) Disassemble the unit by removing the ring pin with stopper to release the burger tray.
2) Remove the handle assembly and undo the ring pins.
3) Unthread the burger hopper.
4) Unfasten the knobs and remove the top plate assembly.
5) Wash each component in mild detergent or dishsoap.
6) Dry all components and reassemble by following the steps provided in the assembly chart.
Cauon: This product is NOT dishwasher safe.


Produktspezifikationen

Marke: Garde XL
Kategorie: Anderes Küchengerät
Modell: 181BRGPBASE

Brauchst du Hilfe?

Wenn Sie Hilfe mit Garde XL 181BRGPBASE benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten