GARDE 181CHEESE34 Bedienungsanleitung
GARDE
Schneidemaschine
181CHEESE34
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für GARDE 181CHEESE34 (1 Seiten) in der Kategorie Schneidemaschine. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2.5 Benutzern mit durchschnittlich 4.6 Sternen bewertet
Seite 1/1
QUICK START
GUIDE
CHEESE CUTTERS
MODELS
181CHEESE38 - 3/8"
181CHEESE34 - 3/4"
Please read and comply with the instructions listed on this document.
To get the best service life and performance from your machine, clean
it thoroughly before and after each use by following the instructions
listed below. Minimize the use of alkaline cleaners, as they may dull the
finish and cause pitting.
OPERATION
1. Set the unit on a at, sturdy surface.
2. Prepare the block of cheese to be cut. Ensure that the
block of cheese is reduced to a size that can be placed
on the support block assembly.
3. Raise the cutting bow to the upright position and place
the cheese block on the support block assembly. It is
recommended that the largest dimension of the cheese
block be pointed towards the cutting bow wires to
produce the best cut.
4. Slowly and steadily press the cutting bow through the
cheese block. This will produce slices of cheese.
5. To produce cheese cubes, rotate the cheese block
90 degrees and repeat steps 3 and 4.
CLEANING AND MAINTENANCE
1. For best results, wash the unit soon after each use to
prevent cheese from hardening prior to washing.
2. Pull ring pin to remove the cutting bow.
3. Wash the main frame thoroughly with a pressure spray or
conventional sink.
4. Use a cleaning brush to wash the cutting bow and the
cutting bow wires.
- Cutting bow wires can be removed and washed separately
by removing the screws on the back of the cutting bow.
5. Dry all components and reassemble the unit.
REPLACING THE CUTTING BOW
1. Remove the cutting bow from the unit by removing the ring
pin and lifting the cutting bow off.
2. Line up the alternate cutting bow on the frame so the ring
pin holes are aligned.
3. Insert the ring pin from either side of the frame.
REPLACEMENT PARTS
Item Number Description
181CHSBLD34
3/4" Cutting Bow
181CHSBLD38
3/8" Cutting Bow
181CHSBLDSET
3/4" 3/8" and Cutting Bow Set
181SUCCUP Suction Foot
181RINGPIN Ring Pin
02/2024
Produktspezifikationen
| Marke: | GARDE |
| Kategorie: | Schneidemaschine |
| Modell: | 181CHEESE34 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit GARDE 181CHEESE34 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schneidemaschine GARDE
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
Bedienungsanleitung Schneidemaschine
- Schneidemaschine G3 Ferrari
- Schneidemaschine Berkel
- Schneidemaschine Coline
- Schneidemaschine Cigweld
- Schneidemaschine OXO
- Schneidemaschine Severin
- Schneidemaschine PowerTec Kitchen
- Schneidemaschine Orbegozo
- Schneidemaschine Fritel
- Schneidemaschine Borner
- Schneidemaschine Venga
- Schneidemaschine Nevir
- Schneidemaschine Black And Decker
- Schneidemaschine Perel
- Schneidemaschine Clas Ohlson
Neueste Bedienungsanleitung für -Kategorien-
12 Juni 2025
12 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025