Garmin LiveScope 2 LVS42HD Bedienungsanleitung
Seiten 16 Fischfinder
Lies die Bedienungsanleitung für Garmin LiveScope 2 LVS42HD kostenlos online oder lade das PDF herunter. Diese Anleitung wurde 0 Mal aufgerufen. Frage zu diesem Modell? Stelle eine Frage
LIVESCOPE
™
2 TRANSDUCER
Installation Instructions
Important Safety Information
WARNING
See the guide in the chartplotter product box for product warnings and Important Safety and Product Information
other important information.
You are responsible for the safe and prudent operation of your vessel. Sonar is a tool that enhances your
awareness of the water beneath your boat. It does not relieve you of the responsibility of observing the water
around your boat as you navigate.
CAUTION
Failure to install and maintain this equipment in accordance with these instructions could result in damage or
injury.
NOTICE
For the best possible performance and to avoid potential damage to the device or to your vessel, you must
install this device according to these instructions.
Read all installation instructions before proceeding with the installation. If you experience difficulty during the
installation, go to for more information.support.garmin.com
Software Update
You must update the Garmin
®
chartplotter software when you install this device. For instructions on updating
the software, see your chartplotter owner's manual at .support.garmin.com
Installation Support Videos
You can view videos online for assistance when installing this device.
You can access the videos by going to in your web browser or by scanning garmin.com/videos/lvs2
this QR code with your smartphone.
Tools Needed
•Flat screwdriver or 8mm wrench or socket to install the barrel mount clamp
•Electrical tape (preferred) or cable ties
Parts Bags
The installation hardware for the transducer is included in labeled bags. As you complete the installation
process, each procedure begins with a reference to the label on the parts bag needed to complete the
procedure. You can use this table to review or verify the parts bags needed for the installation procedures.
NOTE: You should leave all parts in the labeled bags until the instructions advise you to open a specific bag. Not
all hardware is used for all installation types.
Contains parts needed when installing the side shaft mount
Contains parts needed when installing the barrel mount
Contains parts needed when installing the perspective, shaft, or barrel mount
Contains parts needed when installing the side shaft mount
Contains parts needed when installing the side shaft mount
July 2026GUID-9C83E43A-D15D-4D48-9AF6-AF0CBFA49D98 v3
Produktspezifikationen
| Marke: | Garmin |
| Kategorie: | Fischfinder |
| Modell: | LiveScope 2 LVS42HD |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Garmin LiveScope 2 LVS42HD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten