Garmin Montana Marine Mount Bedienungsanleitung
Lies die bedienungsanleitung für Garmin Montana Marine Mount (87 Seiten) kostenlos online; sie gehört zur Kategorie Navigator. Dieses Handbuch wurde von 15 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 8 Bewertungen. Hast du eine Frage zu Garmin Montana Marine Mount oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/87
Instructions
Instructions
Istruzioni
Anweisungen
Instrucciones
Instruções
Instructies
Instruktioner
Ohjeet
Instruksjoner
Instruktioner
Instrukcja
Pokyny
Инструкции
Marine Mount
MONTANA™ 600 Series
2 Montana600SeriesMarineMountInstructions
See the Important Safety and Product Information in the Montana product box
before installing the marine mount.
Always wear safety goggles, ear protection, and a dust mask when drilling,
cutting, or sanding.
notice
Incorrectly wiring the power or audio cable with bare wire leads can result
in damage to the boat or the battery. Garmin strongly recommends having an
experienced installer with the proper knowledge of electrical systems install the
mount.
The metal contacts on the Montana and the mount should be kept dry to avoid
equipment damage. Use the weather cap on the mount at all times when the unit is
not mounted to keep the metal contacts dry and protected.
• Drill
• Hardware for the swivel mount: 3 bolts or 3 screws (not included)
◦#8 (4 mm) pan-head machine bolts with matching nuts and washers and
a 5/32 in. (5 mm) drill bit
◦#8 (4 mm) pan-head self-tapping screws and a 1/16 in. (1.5 mm) drill bit
for drilling starter holes
Montana600SeriesMarineMountInstructions 3
• 3/8 in. (9.5 mm) wrench or socket
• Phillips or at screwdriver
notice
Do not place the swivel mount in an area that is exposed to extreme temperature
or conditions. The temperature range for the Montana is from 5°F to 158°F (from
-15°C to 70°C). Extended exposure to temperatures exceeding this range (in
storage or operating conditions) may cause failure of the LCD screen.
Use pan-head machine bolts or self-tapping screws to secure the swivel base. If
you use screws with countersunk heads, you may damage the mounting bracket.
Select a location to install the mount.
• The location provides a clear view of the screen and access to the Montana.
• The location is sturdy enough to support the Montana and the mount.
• The location allows room for the routing and connection of the cables.
There should be at least a 3 in. (8 cm) clearance behind the case.
notice
Do not overtighten the screws or bolts; you may damage the swivel base.
Produktspezifikationen
| Marke: | Garmin |
| Kategorie: | Navigator |
| Modell: | Montana Marine Mount |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Garmin Montana Marine Mount benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Navigator Garmin
2 Oktober 2024
1 Oktober 2024
25 September 2024
25 September 2024
25 September 2024
18 September 2024
18 September 2024
16 September 2024
15 September 2024
13 September 2024
Bedienungsanleitung Navigator
- Hagenuk
- Coyote Systems
- GlobalSat
- Raymarine
- Danew
- Clatronic
- Dashmate
- Alfa Romeo
- Motorola
- Kenwood
- Sylvania
- NAVIGON
- Bushnell
- TELE System
- Route 66
Neueste Bedienungsanleitung für -Kategorien-
20 Juni 2025
14 Oktober 2024
14 Oktober 2024
14 Oktober 2024
12 Oktober 2024
12 Oktober 2024
9 Oktober 2024
9 Oktober 2024
8 Oktober 2024
8 Oktober 2024