Garmin OnBoard Bedienungsanleitung
Seiten 48 Nicht kategorisiert
Lies die Bedienungsanleitung für Garmin OnBoard kostenlos online oder lade das PDF herunter. Diese Anleitung wurde 0 Mal aufgerufen. Frage zu diesem Modell? Stelle eine Frage
GARMINONBOARD
™
INSTALLATION
INSTRUCTIONS
Important Safety Information
WARNING
See the guide in the product box for product warnings and other
Important Safety and Product Information
important information.
Failure to install this device according to these instructions could result in personal injury, damage to the vessel
or device, or poor product performance.
CAUTION
For the best possible performance and to avoid potential injury, damage to the device, or damage to your vessel,
installation by a qualified marine installer is recommended.
To avoid possible personal injury, always wear safety goggles, ear protection, and a dust mask when drilling,
cutting, or sanding.
NOTICE
When drilling or cutting, always check what is on the opposite side of the surface to avoid damaging the vessel.
Tools Needed
•Drill and a 2mm (
5
/
64
in.) drill bit
•Wire cutters and strippers
•Marine grade tap splice connector for 22AWG wire or solder and heat-shrink tubing
•Cable ties
•#2 Phillips screwdriver for mounting the GOS
™
10 hub
•#1 Phillips screwdriver for mounting the optional antenna
•18AWG (0.75mm²) and 22AWG (0.34mm²) wire for possible cable extensions
GUID-7D06FCCD-97F4-4DD5-9900-79121558C4B8 v2
December 2025
Produktspezifikationen
| Marke: | Garmin |
| Kategorie: | Nicht kategorisiert |
| Modell: | OnBoard |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Garmin OnBoard benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten