GE JX1527DMBB Bedienungsanleitung
Seiten 8 Mikrowelle
Lies die Bedienungsanleitung für GE JX1527DMBB kostenlos online oder lade das PDF herunter. 34 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
PARTS INCLUDED
NOTE:This kit has extra screws to prevent the technician
from spending extra time locating a replacement screw
during installation.
PARTQUANTITY
❒ Trim Frame1
❒ Bottom Duct1
❒ Top Bracket1
❒ Bottom Bracket1
❒ Upper Duct1
❒ Rear Duct1
❒ 4 mm x 14 mm22 required
Round-Head 2 extra
Screws
❒ 4 mm x 14 mm4 required
Flat-Head 2 extra
Screws
❒ Anti-Tip Brace 1
❒ Anti-Tip Bracket 1
❒ Template1
READ CAREFULLY.
KEEP THESE INSTRUCTIONS.
Installation
Built-In Trim Kits
Instructions
JX1527 JX1530
1
❒
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•
IMPORTANT —Save these instructions
for local inspector’s use.
•
IMPORTANT —Observe all governing codes
and ordinances.
•Note to Installer – Be sure to leave these instructions
with the Consumer.
•Note to Consumer – Keep these instructions for future
reference.
•Skill level – Installation of this appliance requires basic
mechanical and electrical skills.
•Completion time – 1 to 3 hours
•Proper installation is the responsibility of the installer.
•Product failure due to improper installation is not covered
under the Warranty.
•This kit is UL/CSA listed for installation alone or over any
GE/GE Profile single electric wall oven. Not for use adjacent
to (within 2 feet of) any gas or electric range, cooktop
or oven.
•For easier installation and personal safety, we
recommend that two people install this microwave oven.
•Unplug the microwave oven before attempting installation
of this kit.
•This kit is for use on models: PEB1590DMBB,
PEB1590DMWW, PEB1590SMSS, PEB159CDNBB,
PEB159CSNSS and PEB159CDNWW.
•Do not alter or modify any part of this kit or the oven.
WARNING —This oven must be plugged into a
properly grounded 3-hole, 120V receptacle as required by
the National Electrical Code or Canadian Electrical Code.
FOR YOUR SAFETY:
WARNING —Before beginning the installation,
switch power off at service panel and lock the service
disconnecting means to prevent power from being switched
on accidentally. When the service disconnecting means
cannot be locked, securely fasten a prominent warning
device, such as a tag, to the service panel.
Questions? In the U.S., call 800.GE.CARES (800.432.2737) or Visit our Website at:ge.com.
In Canada, call 1.800.561.3344 or Visit our Website at:GEAppliances.ca.
Alle Fehlercodes GE Mikrowelle 7 Fehlercodes aus 4 Bedienungsanleitungen, mit Bedeutung.
Produktspezifikationen
| Marke: | GE |
| Kategorie: | Mikrowelle |
| Modell: | JX1527DMBB |
Brauchst du Hilfe?
Wenn Sie Hilfe mit GE JX1527DMBB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Mikrowelle GE
GE GCBK09N1WSS Bedienungsanleitung GE JX1830SB Bedienungsanleitung GE JX36DBB Bedienungsanleitung GE JX2127WH Bedienungsanleitung GE JX1530DMWW Bedienungsanleitung GE JTP90DPWW Bedienungsanleitung GE Spacemaker JNM1541SPSS Bedienungsanleitung GE PEM31 Bedienungsanleitung
Alle GE Mikrowelle Bedienungsanleitungen
Beliebt in Mikrowelle
GE JX1527MWW Bedienungsanleitung GE JVM3160RTSS Bedienungsanleitung GE JVM1440CK Bedienungsanleitung
Bedienungsanleitung Mikrowelle
Neueste Bedienungsanleitungen für Mikrowelle
Midea MM20CF2E Bedienungsanleitung Midea TG925H3MTBL Bedienungsanleitung Kogan KAGMA20MCMA Bedienungsanleitung Kogan KAGMA32FBMA Bedienungsanleitung Midea MMC11S2BBB Bedienungsanleitung Midea MMC09S5ABM Bedienungsanleitung Nordmende NM825BBL Bedienungsanleitung Domo DO2017G Bedienungsanleitung Domo DO2323 Bedienungsanleitung Domo DO2325 Bedienungsanleitung