GE Profile JP960TCWW Bedienungsanleitung

Lies die bedienungsanleitung für GE Profile JP960TCWW (2 Seiten) kostenlos online; sie gehört zur Kategorie Ofen. Dieses Handbuch wurde von 32 Personen als hilfreich bewertet und erhielt im Schnitt 3.6 Sterne aus 16.5 Bewertungen. Hast du eine Frage zu GE Profile JP960TCWW oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Specification Created 3/01

TM

JP930BC/CC/SC/TC—GE Profile™ 30" Built-In CleanDesign Electric Cooktop

Counter Installation (in inches)Cooktop Dimensions (in inches)

Electrical junction

box 16" MIN.

below countertop

30" MIN. to

unprotected

cabinet

Cut should

not interfere

with cabinet

structure at

front

1-3/4" MIN.

clearance to

side wall

from cut-out

1-1/2" MIN.

clearance to

side wall

from cut-out

18" MIN.

to cabinet

1-3/4" to

rear wall

13" MAX.

depth

Note: If installing with a GEProfile Performance

™or GEProfile™Telescopic Downdraft

System, consult both cooktop and downdraft installation instructions packed with product

before installing. Cooktop gas/electric supply may need

to be re-routed to install downdraft.

Note: Consult cabinet and countertop manufacturer’s specs for flush mount installation

prior to install.

Installation Information: Requires a 5" free area between the bottom of the

cooktop to any combustible material, i.e., shelving. Free area not required when installing wall

oven underneath cooktop. Refer to installation instructions. Requires an 18" minimum from

cooktop to adjacent overhead cabinets. Units are furnished with a 48" flexible armored cable.

Before installing, consult installation instructions packed with product for current

dimensional data. 36" Ribbon cooktops are approved for use over GE 30" Single Wall Ovens

only. 30" Ribbon cooktops are approved for use over select GE 29" and GE 30" Single Wall

Ovens. Refer to cooktop and wall oven installation instructions packed with product for

current dimensional data.

Filler Trim Kit

When replacing an old GE 30" cooktop (with larger opening) with Models

JP938/930/350/340, use the following one-piece trim kit to fill in the over-size hole.

Available at additional cost.

JXTR31W (True White)

JXTR31B (Black glass with black, white or bisque pattern)

Flush Mount Installation Kit

Accommodates both 30" and 36" installations. Not for use with stainless steel models.

JXFLMTW (True white glass)

JXFLMBB (Black glass with black, white or bisque pattern)

3-1/4*

Cooktop

2-1/2"

Required

28-1/2

19-5/8

29-3/4** 20-7/8**

*Depth of unit at conduit location (rear) is 4-5/8"

**Stainless steel cooktop dimensions are

29-7/8" (width) and 21-1/2" (depth)

R

Listed by

Underwriters

Laboratories

For answers to yourMonogram,

®GE Profile™or

GE appliance questions, visit our website at

WWW.GEAppliance.com or call

GEAnswer Center®service, 800.626.2000.

KW Rating

240V8.1

208V6.1

Breaker Size

240V40 Amps†

208V30 Amps†

†Note:Check local codes for required breaker size

Produktspezifikationen