GE Profile JX1527CCH Bedienungsanleitung
Seiten 8 Engels magnetron
Lies die Bedienungsanleitung für GE Profile JX1527CCH kostenlos online oder lade das PDF herunter. 61 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
PARTS INCLUDED
NOTE: This kit has extra screws to prevent the technician
from spending extra time locating a replacement screw
during installation.
PART QUANTITY
❒ Trim Frame1
❒ Bottom Duct1
❒ Top Bracket1
❒ Bottom Bracket1
❒ Upper Duct1
❒ Rear Duct1
❒ 4 mm x 14 mm22 required
Round-Head 2 extra
Screws
❒ 4 mm x 14 mm4 required
Flat-Head 2 extra
Screws
❒ Anti-Tip Brace 1
❒ Anti-Tip Bracket 1
❒ Template 1
READ CAREFULLY.
KEEP THESE INSTRUCTIONS.
Installation Built-In Trim Kits
Instructions JX1527 JX1530
1
❒
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•IMPORTANT —Save these instructions
for local inspector’s use.
•IMPORTANT —Observe all governing codes
and ordinances.
•Note to Installer – Be sure to leave these instructions
with the Consumer.
•Note to Consumer – Keep these instructions for future
reference.
•Skill level – Installation of this appliance requires basic
mechanical and electrical skills.
•Completion time – 1 to 3 hours
•Proper installation is the responsibility of the installer.
•Product failure due to improper installation is not covered
under the Warranty.
•This kit is UL/CSA listed for installation alone or over any
GE/GE Profile single electric wall oven. Not for use adjacent
to (within 2 feet of) any gas or electric range, cooktop
or oven.
•For easier installation and personal safety, we
recommend that two people install this microwave oven.
•Unplug the microwave oven before attempting installation
of this kit.
•This kit is for use on models: PEB1590DMBB,
PEB1590DMWW, PEB1590SMSS, PEB159CDNBB,
PEB159CSNSS and PEB159CDNWW.
•Do not alter or modify any part of this kit or the oven.
WARNING —This oven must be plugged into a
properly grounded 3-hole, 120V receptacle as required by
the National Electrical Code or Canadian Electrical Code.
FOR YOUR SAFETY:
WARNING —Before beginning the installation,
switch power off at service panel and lock the service
disconnecting means to prevent power from being switched
on accidentally. When the service disconnecting means
cannot be locked, securely fasten a prominent warning
device, such as a tag, to the service panel.
Questions? In the U.S., call 800.GE.CARES (800.432.2737) or Visit our Website at:ge.com.
In Canada, call 1.800.561.3344 or Visit our Website at:GEAppliances.ca.
Alle Fehlercodes GE magnetron 8 Fehlercodes aus 4 Bedienungsanleitungen, mit Bedeutung.
Produktspezifikationen
| Marke: | GE |
| Kategorie: | magnetron |
| Modell: | Profile JX1527CCH |
Brauchst du Hilfe?
Wenn Sie Hilfe mit GE Profile JX1527CCH benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung magnetron GE
GE JX36CTS Bedienungsanleitung GE JX7227SLSS Bedienungsanleitung GE JX7227DLBB Bedienungsanleitung GE JX46WH Bedienungsanleitung GE Adora DVM7195EKES Bedienungsanleitung GE SCB2000CCC Bedienungsanleitung GE JVM1490WH Bedienungsanleitung GE HVM1540LNCS Bedienungsanleitung
Alle GE magnetron Bedienungsanleitungen
Beliebt in magnetron
GE JVM1630CH Bedienungsanleitung GE JNM3151DFBB Bedienungsanleitung GE JES0734PMRR Bedienungsanleitung
Bedienungsanleitung magnetron
Neueste Bedienungsanleitungen für magnetron
Kenwood K20MSS10 Bedienungsanleitung Caso C1800M Bedienungsanleitung G3 Ferrari G10030 Bedienungsanleitung Whirlpool AMW 814 IX Bedienungsanleitung Zanker MWV 961 Combi Bedienungsanleitung ETNA ECM173 Bedienungsanleitung Whirlpool MT4110SPQ Bedienungsanleitung Küppersbusch EMWG 8605.1E Bedienungsanleitung ICES IMO-30LS41S Bedienungsanleitung Wolf MD24TE/S Bedienungsanleitung