GE Profile P2S975WEMWW Bedienungsanleitung

Lies die bedienungsanleitung für GE Profile P2S975WEMWW (60 Seiten) kostenlos online; sie gehört zur Kategorie Ofen. Dieses Handbuch wurde von 38 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 2 Bewertungen. Hast du eine Frage zu GE Profile P2S975WEMWW oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

TOOLS YOU WILL NEED

1

MATERIALS YOU MAY NEED

31-10641-1 03-07 JR

Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com

In Canada, call 1.800.361.3400 or Visit our Website at: www.geappliances.ca

Installation

Self-Cleaning Dual Fuel

Instructions

Slide-In Range

P2S975

BEFORE YOU BEGIN

Read these instructions completely

and carefully.

•IMPORTANT —Save these

instructions for local inspector’s use.

•IMPORTANT —Observe all

governing codes and ordinances.

•Note to Installer – Be sure to leave these

instructions with the Consumer.

•Note to Consumer – Keep these

instructions for future reference.

•Product failure due to improper installation

is not covered under the Warranty.

WARNING —This appliance must

be properly grounded.

•Proper installation is the responsibility

of the installer and product failure due

to improper installation is NOT covered

under warranty.

IN THE COMMONWEALTH OF

MASSACHUSETTS:

• This product must be installed by a

licensed plumber or gas fitter.

• When using ball-type gas shut-off valves,

they shall be the T-handle type.

• A flexible gas connector, when used, must

not exceed 3 feet.

PARTS INCLUDED

Anti-Tip Bracket

Anchor Sleeves

Lag Bolts

(For Concrete Floors Only)

Shut Off ValvePipe Fittings

CSA-Approved Flexible Gas Line

3/8″Min. ID, 1/2″NPT Connection,

3-foot Maximum Length (Massachusetts only)

Joint Sealant

Wrench or Pliers

(for 1-7/16” Nut)

Level

1/4” Nut Driver

Safety Glasses

Drill

Tape Measure

Screws

Rear Filler

2 Screws

Phillips Head

Screwdriver Pipe Wrench

Flat-blade

Screwdriver

Produktspezifikationen