Gigabyte GA-8IG1000MF Bedienungsanleitung


Seiten 104 Engels Hauptplatine

Lies die Bedienungsanleitung für Gigabyte GA-8IG1000MF kostenlos online oder lade das PDF herunter. 36 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage

When you installing AGP card, please make sure the following notice
is fully understood and practiced. If your AGP card has "AGP 4X/8X
(1.5V) notch"(show below), please make sure your AGP card is AGP
4X/8X (1.5V).
Caution: AGP 2X card is not supported by Intel® 845(GE/PE) / 845(E/G) /
850(E) / E7205 / 865(G/PE/P) / 875P. You might experience system
unable to boot up normally. Please insert an AGP 4X/8X card.
Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X
mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X(1.5V) mode
by adjusting the jumper. The factory default for this card is 2X(3.3V).
The GA-8IG1000MF Series (or any AGP 4X/8X only) motherboards might not
function properly, if you install this card without switching the jumper to
4X(1.5V) mode in it.
Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color",
the graphics card manufacturer & some SiS 305 cards, their golden finger is
compatible with 2X(3.3V)/4X(1.5V) mode AGP slot, but they support 2X(3.3V)
only. The GA-8IG1000MF Series (or any AGP 4X/8X only) motherboards might
not function properly, If you install this card in it.
Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage
128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V)
specification. Therefore, AG32S(G) will work fine with Intel® 845(GE/PE) /
845(E/G) / 850(E) / E7205 / 865(G/PE/P) / 875Pbased motherboards.
AGP 4X/8X notch

Bewerten Sie dieses Handbuch


Produktspezifikationen

Marke: Gigabyte
Kategorie: Hauptplatine
Modell: GA-8IG1000MF

Brauchst du Hilfe?

Wenn Sie Hilfe mit Gigabyte GA-8IG1000MF benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten