Gigabyte GA-8PENXP Bedienungsanleitung


Seiten 112 Engels Hauptplatine

Lies die Bedienungsanleitung für Gigabyte GA-8PENXP kostenlos online oder lade das PDF herunter. 16 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage

When you installing AGP card, please make sure the following
notice is fully understood and practiced. If your AGP card has
"AGP 4X/8X(1.5V) notch"(show below), please make sure your AGP
card is AGP 4X/8X (1.5V).
Caution: AGP 2X(3.3V) card is not supported by Intel®845(GE/PE) /
845(E/G) / 850(E)/E7205 / 865(P/G/PE)/875P. You might experience
system unable to boot up normally. Please insert an AGP Pro 4X/8X
(1.5V) card
Example 1: Diamond Vipper V770 golden finger is compatible with
2X/4X mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X
(1.5V) mode by adjusting the jumper. The factory default for this card is
2X(3.3V).
The GA-8PENXP motherboards might not function properly, if you install
this card without switching the jumper to 4X(1.5V) mode in it.
Example 2: Some ATi Rage 128 Pro graphics cards made by
"Power Color", the graphics card manufacturer & some SiS 305 cards,
their golden finger is compatible with 2X/4X mode AGP slot, but they
support 2X(3.3V) only. The GA-8PENXP motherboards might not function
properly, If you install this card in it.
Note : Although Gigabyte's AG32S(G) graphics card is based on
ATi Rage 128 Pro chip, the design of AG32S(G) is compliance
with AGP 4X(1.5V) specification. Therefore, AG32S (G)will work
fine with Intel®845(GE/PE) / 845(E/G) / 850(E) /E7205 / 865(P/G/PE)/875P.
based motherboards.
Before you install PCI cards, please remove the Dual BIOS
label from PCI slots if there is one.
AGP 4X/8X nohtc

Bewerten Sie dieses Handbuch


Produktspezifikationen

Marke: Gigabyte
Kategorie: Hauptplatine
Modell: GA-8PENXP

Brauchst du Hilfe?

Wenn Sie Hilfe mit Gigabyte GA-8PENXP benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten