Gladiator GABK301PRS Bedienungsanleitung
Gladiator
Nicht kategorisiert
GABK301PRS
Lies die bedienungsanleitung für Gladiator GABK301PRS (10 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Gladiator GABK301PRS oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/10
WELDED-STEEL
TALL GEARBOX &
GEARLOCKER
BRACKET KIT
COMPACTOR
Installation Instructions
ENSEMBLE
DE SUPPORTS
MURAUX POUR
GRANDE ARMOIRE
À OUTILS EN ACIER
SOUDÉ
Instructions d'installation
JUEGO DE
SOPORTE PARA
PARED DE ACERO
FUNDIDO PARA
ARMARIO ALTO Y
ARMARIO PARA
HERRAMIENTAS
Instrucciones de instalación
In U.S.A. call: 1-866-342-4089
Aux États-Unis, composer le: 1866342-4089
En los EE.UU., llame al: 1-866-342-4089
W11740982A
In Canada call: 1-800-807-6777
Au Canada, composer le: 1800807-6777
En Canadá, llame al: 1-800-807-6777
www.gladiatorgarageworks.com
www.gladiatorgarageworks.ca
TABLE OF CONTENTS/ TABLE DES MATIÈRES /ÍNDICE
Model
GABK301PRS -
Silver
Modèle
GABK301PRS - Argent
Modelo
GABK301PRS - Plateado
MOUNTING BRACKET SAFETY 2 ...........
INSTALLATION INSTRUCTIONS 2 ...........
Tools and Parts 2 ....................................
Bracket Use Requirements 2 ..................
Unpack Brackets 2 .................................
Attach Mounting Brackets 2 ...................
Mount the Cabinet to GearWall
®
Panels
or GearTrack
®
Channels 3 ......................
WARRANTY 4 ............................................
SÉCURITÉ DE LA TRINGLE DE
MONTAGE 5 ..............................................
INSTRUCTIONS D'INSTALLATION 5 ......
Outillage et pièces 5 ...............................
Spécications d'utilisation
des brides 5 ............................................
Déballage des brides 5 ..........................
Fixation des brides de montage 5 ..........
Montage de l’armoire sur les panneaux
GearWall
®
ou prolés GearTrack
®
6 .......
GARANTÍE 7 ..............................................
SEGURIDAD DEL SOPORTE DE
MONTAJE 8 ...............................................
INSTRUCCIONES DE INSTALACIÓN.... 8
Piezas y herramientas 8 ..........................
Requisitos para el uso
de los soportes 8 ....................................
Desempaque los soportes 8 ...................
Fije los soportes de montaje 8 ................
Instale el armario en los paneles
GearWall
®
o los canales GearTrack
®
9 ...
GARANTÍA 10 ............................................
2
MOUNTING BRACKET SAFETY
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or
“WARNING.” These words mean:
INSTALLATION INSTRUCTIONS
Tools and Parts
Gather the required tools and parts before starting installation.
Tools Needed:
■1/2" Wrench
Parts Supplied:
■Mounting brackets (3) ■1/4" x 1/2" Carriage bolts (6)
■Hex nuts (6) ■Washers (6)
Bracket Use Requirements
■Intended for use with Gladiator
®
Welded-Steel Tall GearBox &
GearLocker cabinets only.
NOTE: These brackets are not designed to be installed on
cabinet models: GATGB000LG0 and GATGBL00LG0.
■Intended to be used for mounting on Gladiator GearWall
®
panels or GearTrack
®
channels.
■Brackets will support a cabinet with a maximum weight limit
of 300 lbs (136 kg).
Unpack Brackets
1. Verify contents. See “Parts Supplied.”
2. Dispose of/recycle all packaging materials.
Attach Mounting Brackets
IMPORTANT: There are three groups of four slots in the back
panel of the tall cabinet. The mounting brackets must be
attached to the top pair of slots in each group.
3
Attach Top Mounting Bracket
1. With the rim of a mounting bracket pointing down, align the
holes in the bracket with the top pair of slots in the back
panel.
2. Working from the back, insert two carriage bolts through the
bracket and back panel as shown.
A
B
A. Carriage bolts
B. Bracket rim
3. Working from the cabinet interior, fasten each bolt with a
washer and a hex nut.
4. Slide the bracket to the very top of the slot and fully tighten
the nuts.
Attach the Middle and Bottom Mounting Brackets
1. With the rim of a mounting bracket pointing down, align the
holes in the bracket with the top pair of slots located in the
middle section of the back panel.
2. Working from the back, insert two carriage bolts through the
bracket and back panel.
3. Working from the cabinet interior, fasten each bolt with a
washer and a hex nut. Hand tighten only, as this bracket will
need to be adjusted to mount the cabinet on the wall.
4. Repeat above steps to attach bottom mounting bracket to
the lower section of the back panel.
IMPORTANT: Fully tighten the nuts on the middle and bottom
brackets after mounting the cabinet to the wall, See “Mount the
Cabinet to GearWall
®
Panels or GearTrack
®
Channels.”
Mount the Cabinet to GearWall
®
Panels or GearTrack
®
Channels
IMPORTANT:
■Be sure the GearWall
®
panels or GearTrack
®
channels are
installed with mounting screws in every slot and at every
stud location with a maximum of 24" (60.96 cm) horizontally
between screws.
■If GearTrack
®
channels will be used to support the Gladiator
®
Tall GearBox cabinet, they must be installed 18" (46 cm)
apart.
18" (46 cm)
NOTE: The two nuts on the middle and bottom mounting
brackets must be loose enough to allow the brackets to move in
the slots on the cabinet.
1. Close the cabinet doors.
2. Determine cabinet mounting location on GearWall
®
panels or
GearTrack
®
channels.
3. Using two or more people, engage the top bracket into the
slot by lifting up, pushing toward the wall and lowering the
bracket rim into the slot as shown.
4. Make sure the top bracket is fully engaged in the slot as
shown.
WARNING
Excessive Weight Hazard
Use two or more people to move and install compactor.
Failure to do so can result in back or other injury.
A
B
C
A. Bracket rim
B. Slot
C. Bracket fully
engaged
5. Open the cabinet doors.
6. From inside the cabinet, grasp the bolts in the middle bracket
and adjust the bracket until it aligns with the slot in the
GearWall
®
panel or GearTrack
®
channel.
7. Push the cabinet toward the wall and lower the middle
mounting bracket into the slot.
8. Make sure the middle bracket is fully engaged in the slot as
shown.
9. Repeat for the bottom bracket.
10. Using a 1/2" wrench, fully tighten the nuts attaching the
middle and bottom mounting brackets.
Produktspezifikationen
| Marke: | Gladiator |
| Kategorie: | Nicht kategorisiert |
| Modell: | GABK301PRS |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Gladiator GABK301PRS benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Gladiator
12 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- ESUN
- Leef
- Tepro
- Elkay
- Commercial Chef
- Consul
- Best Service
- Blustream
- Jocel
- Etymotic
- Taylor
- Barazza
- Mac Audio
- Perfecta
- APA
Neueste Bedienungsanleitung für -Kategorien-
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025