Golden Lighting Heartwood 8063-M1L BUS Bedienungsanleitung

Lies die bedienungsanleitung für Golden Lighting Heartwood 8063-M1L BUS (9 Seiten) kostenlos online; sie gehört zur Kategorie Erleichterung. Dieses Handbuch wurde von 44 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 2 Bewertungen. Hast du eine Frage zu Golden Lighting Heartwood 8063-M1L BUS oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Canopy1eaHex nut2ea

Wire

connectors

2ea

Mounting

bracket

1eaMounting screws2eaSocket rings

1ea

Deco Nut

2ea

Fixture mounting

screws

2eaSocket washer1ea

12" Rod

2ea6" Rod

1ea

Part NeededQuantity

Part NeededQuantity

Reason why( missing, scratched, broken glass, bent, bad nish)

Comments

PARTS & ASSEMBLY SHEET

This xture assembled PO:__________ Date: ________

Fixture Name: Heartwood 8063-M1L BUS

Notice: Please review the parts listing and check for all parts before assembling the xture. If any parts

are missing or damaged, please note onthis sheet and contact the place of purchase to arrange for

replacement parts.

PARTS LIST

Company Name:_______________________Co. Account #:_____________

to be lled out by retailer

8063-M1L BUS

Read and review installation instruction sheet, but

do not install before assembling the xture.

F AIIXTURESSEMBLY NSTRUCTIONS

For Customer Service, contact the place of purchase to arrange for replacement parts.

NOTE: INSTALL THE GLASS ASSEMBLY

AFTER THE FIXTURE IS HUNG.

1. By measuring determine correct number of rods

needed for proper hanging height. There are 2 optional

12" rods included.

2. To shorten the xture trim the wires to the desired

length plus at least 8~10 inches.

2b. Slide the 6" rod plus the excess 12" rods o the wire.

2c. Thread the 6" rod back onto the wire then thread the

wire through the swivel conection into the canopy.

3. To lengthen the xture pull all the wire out of the

canopy.

3b. Slide the 6" rod o the wire.

3c. Thread the additional rods with the 6" rod last back

onto the wire then thread the wire through the swivel

conection into the canopy.

Fig 1

V

These two Rods may

be removed

or

additional Rods may

be added.

ROD-12 BUS

Produktspezifikationen